#!/bin/bash
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# only executed if productname is changed
if [ ! -e "${SRC}"/etc/default.${CONFIG_PRODUKT} ]; then
echo -e "\033[1m${SORCE_PRODUKT}  --->   ${CONFIG_PRODUKT}\033[0m "
 echo2 "  -- move contents of OEM directory:"
 echo2 "      move /etc/default.${SORCE_PRODUKT} --> /etc/default.${CONFIG_PRODUKT}"
    mkdir -m 755 "${SRC}/etc/default.${CONFIG_PRODUKT}"
   "$TAR" -c -C "${SRC}/etc/default.${SORCE_PRODUKT}" . | "$TAR" -x -C "${SRC}/etc/default.${CONFIG_PRODUKT}"
    rm -fr "${SRC}"/etc/default.${SORCE_PRODUKT}
fi

if [ "${OEM}" == "tcom" ]; then
#use OEM tcom 
 cp -fdrp "${SRC}/etc/default.${CONFIG_PRODUKT}/${OEMLINK}" "${SRC}/etc/default.${CONFIG_PRODUKT}/tcom"
 cp -fdrp "${SRC}/etc/default.${CONFIG_PRODUKT}/${OEMLINK}/strings.tab" --target-directory="${SRC}/etc/default.${CONFIG_PRODUKT}/tcom"
# use tcom defaults from tcom firmware 
 cp -fdrp "${DST}/etc/default.${CONFIG_PRODUKT}/tcom" --target-directory="${SRC}/etc/default.${CONFIG_PRODUKT}"
 echo "-- OEM tcom is in use, IP adress of Box is as with T-com Firmware!"
fi
#copy second source internet dsl menue
[ ${USE_SOURCE2_DSLMNUE} = "y" ] && $sh2_DIR/copy_dsl_tab_pages_SRC2 "${SRC}" "${SRC_2}"
#use scond source web GUI
echo2 "New WEB GUI will be modified"
[ ${USE_SOURCE2_WEBMNUE} = "y" ] && $sh2_DIR/copy_www_SRC2 "${SRC}" "${SRC_2}"


#ATA only--->
if [ ${ATA_ONLY} = "n" ]; then
#add DSL driver depending on the settings made

#/lib/modules/$KernelVersion/kernel/drivers/vinax/drv_vinax.ko:

# "vinax_driver"  
#Attention! Vinax uses additional /dev/vinax device entrys, they are generated via /tools/device_table.txt (makedevice option)
echo "/lib/modules/$KernelVersion/kernel/drivers/vinax/drv_vinax.ko:" >>"${SRC}"/lib/modules/$KernelVersion/modules.dep
cp -fdrp "${DST}"/dev --target-directory="${SRC}" #this copy is onliy usable if run as root


[ -d "${SRC}"/lib/modules/$KernelVersion/kernel/drivers/vinax ] || mkdir "${SRC}"/lib/modules/$KernelVersion/kernel/drivers/vinax
cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/vinax/drv_vinax.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/vinax
[ "${FORCE_TCOM_KDSLDMOD}" = "y" ] && cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/dsld
[ "${FORCE_TCOM_PCMLINK}" = "y" ] && cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/ubik2/pcmlink.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/char/ubik2
cp -fdrp "${DST}"/lib/modules/$KernelVersion/modules.symbols --target-directory="${SRC}"/lib/modules/$KernelVersion
#cp -fdrp "${DST}"/lib/modules/$KernelVersion/modules.dep --target-directory="${SRC}"/lib/modules/$KernelVersion
cp -fdrp "${DST}"/lib/modules/$KernelVersion/modules.alias --target-directory="${SRC}"/lib/modules/$KernelVersion
cp -fdrp "${DST}"/usr/sbin --target-directory="${SRC}"/usr
cp -fdrp "${DST}"/lib/modules/vinax* --target-directory="${SRC}"/lib/modules &&\
echo "-- VINAX DSL driver was taken from the original base firmware!"
[ -f "${SRC}"/usr/share/ctlmgr/libvdsl.so ] || cp -fdrp "${DST}"/usr/share/ctlmgr/libvdsl.so --target-directory="${SRC}"/usr/share/ctlmgr
[ -f "${SRC}"/usr/share/ctlmgr/libtr064.so ] || cp -fdrp "${DST}"/usr/share/ctlmgr/libtr064.so --target-directory=${SRC}/usr/share/ctlmgr
[ -e "${DST}"/lib/modules/fw_dcrhp_1150_ap.bin ] && cp -fdrp "${DST}"/lib/modules/fw_dcrhp_1150_ap.bin --target-directory="${SRC}"/lib/modules &&\
echo "-- fw_dcrhp_1150_ap.bin was taken from the original base firmware"
[ -e "${DST}"/lib/modules/microvoip-dsl.bin ] && cp -fdrp "${DST}"/lib/modules/microvoip-dsl.bin --target-directory="${SRC}"/lib/modules &&\
echo "-- microvoip-dsl.bin was taken from the original base firmware"
#use WLAN (not usabele leds to reboots) 
[ "${FORCE_TCOM_WLANTIAP}" = "y" ] && cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/net/wireless/avm_wlan/wlan/tiap.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/net/wireless/avm_wlan/wlan
#WPA
#cp -fdrp "${DST}"/usr/bin/wpa_authenticator --target-directory="${SRC}"/usr/bin
# copy igdd if not exisant
[ -e "${SRC}"/sbin/igdd ] || cp -fdrp "${DST}"/sbin/igdd --target-directory="${SRC}"/sbin

if [ ${SAVE_TCOM_DSL} = "y" ]; then
    cp -a "${DST}"/lib/modules/vinax* --target-directory=./addon/tmp/W721/squashfs-root/lib/modules &&\
    echo "-- TCOM DSL driver saved to: ./addon/tmp/W721!"
    cp -a "${DST}"/lib/modules/$KernelVersion/kernel/drivers/vinax/drv_vinax.ko --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/vinax
    cp -a "${DST}"/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld
    cp -a "${DST}"/lib/modules/$KernelVersion/modules.symbols --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
#    cp -a "${DST}"/lib/modules/$KernelVersion/modules.dep --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
    cp -a "${DST}"/lib/modules/$KernelVersion/modules.alias --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
    cp -a "${DST}"/usr/sbin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr
    cp -a "${DST}"/usr/share/ctlmgr/libvdsl.so --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr/share/ctlmgr
    cp -a "${DST}"/usr/share/ctlmgr/libtr064.so --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr/share/ctlmgr
    cp -a "${DST}"/lib/modules/fw_dcrhp_1150_ap.bin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules
    cp -a "${DST}"/lib/modules/microvoip-dsl.bin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules
fi

/lib/modules/2.6.13.1-ohio/kernel/drivers/net/wireless/avm_wlan/wlan/tiap.ko


if [ -d ${SRC_2}/lib/modules ]; then
    MODULESDEP_DIR="$(find ${SRC_2}/lib/modules -name modules.dep)" # find file 
    MODULESDEP_DIR=${MODULESDEP_DIR%%/modules.dep*} # von links bis zu /modules.dep
    export KernelVersion2=${MODULESDEP_DIR##*/} # von rechts bis zum letzten /
    echo2 "  -- AVM  Kernel version off source 3 is: $KernelVersion2"
fi

if [ ${SAVE_SRC2_DSL} = "y" ]; then
    cp -av "${SRC_2}"/lib/modules/vinax* --target-directory=./addon/tmp/W721 &&\
    echo "-- AVM DSL driver saved to: ./addon/tmp/W721!"
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/vinax/drv_vinax.ko --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/vinax
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/dsld/kdsldmod.ko --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.symbols --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
#    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.dep --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.alias --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion
    cp -a "${SRC_2}"/usr/sbin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr
    cp -a "${SRC_2}"/usr/share/ctlmgr/libvdsl.so --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr/share/ctlmgr
    cp -a "${SRC_2}"/usr/share/ctlmgr/libtr064.so --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/usr/share/ctlmgr
    cp -a "${SRC_2}"/etc/init.d/rc.vdsl.sh  --target-directory="${SRC}"${HOMEDIR}/addon/tmp/W721/squashfs-root/etc/init.d
    cp -a "${SRC_2}"/lib/modules/fw_dcrhp_1150_ap.bin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules
    cp -a "${SRC_2}"/lib/modules/microvoip-dsl.bin --target-directory=${HOMEDIR}/addon/tmp/W721/squashfs-root/lib/modules
fi

if [ ${USE_SRC2_DSL} = "y" ]; then
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/vinax/drv_vinax.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/vinax
    [ "${FORCE_TCOM_KDSLDMOD}" = "y" ] || cp -a "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/dsld/kdsldmod.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/dsld
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.symbols --target-directory="${SRC}"/lib/modules/$KernelVersion
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.dep --target-directory="${SRC}"/lib/modules/$KernelVersion
    cp -a "${SRC_2}"/lib/modules/$KernelVersion2/modules.alias --target-directory="${SRC}"/lib/modules/$KernelVersion
    cp -a "${SRC_2}"/usr/sbin --target-directory="${SRC}"/usr
    [ -f "${SRC}"/usr/share/ctlmgr/libvdsl.so ] || cp -a "${SRC_2}"/usr/share/ctlmgr/libvdsl.so --target-directory="${SRC}"/usr/share/ctlmgr
    [ -f "${SRC}"/usr/share/ctlmgr/libtr064.so ] || cp -a "${SRC_2}"/usr/share/ctlmgr/libtr064.so --target-directory=${SRC}/usr/share/ctlmgr
    #take vdsl from source 3 if present
    cp -a "${SRC_2}"/lib/modules/vinax* --target-directory="${SRC}"/lib/modules &&\
    #cp -fdpr  "${SRC_2}"/etc/init.d/rc.vdsl.sh  --target-directory="${SRC}"/etc/init.d &&\
    echo "-- vinax driver was taken from the original base firmware!"
    [ -e "${SRC_2}"/lib/modules/fw_dcrhp_1150_ap.bin ] && cp -fdrp "${SRC_2}"/lib/modules/fw_dcrhp_1150_ap.bin --target-directory="${SRC}"/lib/modules &&\
    echo "-- fw_dcrhp_1150_ap.bin was taken from 2nd AVM firmware"
    [ -e "${SRC_2}"/lib/modules/microvoip-dsl.bin ] && cp -fdrp "${SRC_2}"/lib/modules/microvoip-dsl.bin --target-directory="${SRC}"/lib/modules &&\
    echo "-- microvoip-dsl.bin was taken from 2nd AVM firmware"

fi
[ "${USE_OWN_DSL}" = "y" ] && cp -fdrp ./addon/tmp/W721/squashfs-root/* --target-directory="${SRC}" &&\
echo "-- VINAX DSL driver was taken from local directory ./addon/tmp/W721"

if [ "${SAVE_SRC2_KDSLDMOD}" = "y" ]; then
    mkdir -p ./addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld
    cp -fdrp "${SRC_2}"/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko --target-directory=./addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld &&\
    echo "-- 2nd AVM Firmware kdslmod driver saved to: ./addon/tmp/W721"
fi
[ "${FORCE_SRC2_KDSLDMOD}" = "y" ] && cp -fdrp "${SRC_2}"/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/dsld &&\
echo "-- kdslmod driver was taken from 2nd AVM source."

if [ "${FORCE_OWN_KDSLDMOD}" = "y" ] && ! [ -f ./addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko ]; then
 echo "   --> You must save kdsld driver form 2nd AVM source before" && sleep 10 && exit 1
fi
[ "${FORCE_OWN_KDSLDMOD}" = "y" ] && cp -fdrp ./addon/tmp/W721/squashfs-root/lib/modules/$KernelVersion/kernel/drivers/dsld/kdsldmod.ko --target-directory="${SRC}/lib/modules/$KernelVersion/kernel/drivers/dsld" &&\
echo "-- kdslmod driver was taken from local directory ./addon/tmp/W721"

# ther are no newer and compatibel drivers up to now
#[ "${FORCE_VINAX_DRV}" = "y" ] && cp -fdrp ${HOMEDIR}/addon/tmp/modules/vinax/drv_vinax.ko --target-directory="${SRC}/lib/modules/$KernelVersion/kernel/drivers/vinax" &&\
#echo "  -- PPPoA compatible VINAX DSL driver is in use!"
#[ "${FORCE_KDSLD_DRV}" = "y" ] && cp -fdrp ${HOMEDIR}/addon/tmp/modules/dsld/kdsldmod.ko --target-directory="${SRC}/lib/modules/$KernelVersion/kernel/drivers/dsld" &&\
#echo "  -- PPPoA compatible KDSLDMOD driver is in use!"
#----
CPYPSEC="y"
if [ "${COPY_TCOM_BIN}" = "y" ]; then
    cp -fdrp "${DST}"/usr/bin --target-directory="${SRC}"/usr
    cp -fdrp "${DST}"/usr/sbin --target-directory="${SRC}"/usr
#    cp -fdrp "${DST}"/usr/www/cgi-bin --target-directory="${SRC}"/usr/www
#    cp -fdrp "${DST}"/usr/share --target-directory="${SRC}"/usr
#libuser.so
# for file in libfon.so libmini.so libtamconf.so libtelcfg.so libtr064.so libtr069.so  libvdsl.so libvpnstat.so libwlan.so ; do
#	file="${DST}"/usr/share/ctlmgr/$file
#	if [ -f "$file" ]; then
#        cp -fdrp "$file" --target-directory="${SRC}"/usr/share/ctlmgr
#	fi 
# done
    cp -fdrp "${DST}"/bin --target-directory="${SRC}"
    cp -fdrp "${DST}"/sbin --target-directory="${SRC}"
    cp -fdrp "${DST}"/lib --target-directory="${SRC}"
    cp -fdrp "${DST}"/dev --target-directory="${SRC}"
    cp -fdpr  "${DST}"/etc/init.d/rc.dsl.sh  --target-directory="${SRC}"/etc/init.d
#    cp -fdpr  "${DST}"/etc/init.d/rc.S  --target-directory="${SRC}"/etc/init.d
#copy all modules
#cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel
# --> add rc.S
#cp -fdpr  ${HOMEDIR}/addon/tmp/squashfs-root/*  --target-directory="${SRC}"
#CPYPSEC="n"
# <-- 
else
#add entrys in modules.sybols
sed -i -e '/ alias symbol:pcmlink_ul_dspfwversion_pcmrouter pcmlink/a\
alias symbol:pcmlink_ul_closeslots pcmlink\
alias symbol:pcmlink_ul_linkhandle_to_handle pcmlink\
alias symbol:pcmlink_ul_openslots pcmlink' "${SRC}"/lib/modules/$KernelVersion/modules.symbols

sed -i -e '/modprobe tiatm/a\
echo "MODE = vdsl" > \/dev\/avm_power' "${SRC}/etc/init.d/rc.dsl.sh"

fi
sed -i -e '/rc.dsl.sh start/a\
. /etc/init.d/rc.vdsl.sh' "${SRC}/etc/init.d/rc.S"
[ ${USE_OWN_DSL} = "y" ] && cp -fdrp ${HOMEDIR}/addon/tmp/W721/squashfs-root/* --target-directory="${SRC}" &&\
echo "-- DSL driver was taken from local directory ./addon/tmp/W721!"

#sed -i -e '/modprobe ${pcm_link} ${pcm_link_params}/d' "${SRC}/etc/init.d/rc.S" 

#DSL skripts--->
#copy VDSL Skript
cp -fdpr  "${DST}"/etc/init.d/rc.vdsl.sh  --target-directory="${SRC}"/etc/init.d
#Annex 
sed -i -e "s/DSL_Mode=\"VB\"/DSL_Mode=\"V$ANNEX\"/" "${SRC}/etc/init.d/rc.vdsl.sh" 
#sed -i -e "s/annex=B/annex=$ANNEX/" "${SRC}/etc/init.d/rc.dsl.sh" 
#Annex default  
sed -i -e "s/VNX_Mode=\"VB\"/VNX_Mode=\"V$ANNEX\"/" "${SRC}/etc/init.d/rc.vdsl.sh" 

#ATM Parameter
sed -i -e 's/dsl_pipe sarcs 0 0 0 1 32 1/dsl_pipe sarcs 0 0 0 $VPI $VCI 1/' "${SRC}/etc/init.d/rc.vdsl.sh" 
sed -i -e 's/dsl_pipe sarrts 0 0 1 1 32/dsl_pipe sarrts 0 0 1 $VPI $VCI/' "${SRC}/etc/init.d/rc.vdsl.sh" 

sed -i -e '/DSL_Mode="V/a\
#VPI/VCI Config aus ar7cfg holen\
local VCI=`echo ar7cfg.vccs.VCI | ar7cfgctl -s`\
local VPI=`echo ar7cfg.vccs.VPI | ar7cfgctl -s`\
echo ===============\
echo Starting Vinax\
echo ===============\
echo VPI: $VPI\
echo VCI: $VCI' "${SRC}/etc/init.d/rc.vdsl.sh" 
#not in use -->
#if there is still no option within the menus 7570 rc.vdsl.sh is not used!
#sed -i -e "s/dsl_pipe sarcs 0 0 0 1 32 1/dsl_pipe sarcs 0 0 0 $VPI $VCI 1/" "${SRC}/etc/init.d/rc.vdsl.sh" 
#sed -i -e "s/dsl_pipe sarrts 0 0 1 1 32/dsl_pipe sarrts 0 0 1 $VPI $VCI/" "${SRC}/etc/init.d/rc.vdsl.sh" 
#case $KAPSELUNG in 
#    "0") 
#        VNX_PPP="dslencap_pppoe"
#    ;;
#    "1")   
#        VNX_PPP="dslencap_pppoa_llc"
#    ;;
#    "2")
#        VNX_PPP="dslencap_pppoa"
#    ;;
#    *)  echo "Unknown PPP Mode, Using default Mode PPPoE."
#    ;;
#esac
# encapsulation is only usable with 7570 modules but this modules are incompatible with 7170 filrmware
#[ "${KAPSELUNG}" != "" ] && sed -i -e "s/local ppp_conf=.*$/local ppp_conf=${VNX_PPP}/" "${SRC}/etc/init.d/rc.vdsl.sh" 
#VNX_PPP=0 #default is PPPoE
#[ "${KAPSELUNG}" != "" ] && sed -i -e "s/VNX_PPP=0/VNX_PPP=${VNX_PPP}/" "${SRC}/etc/init.d/rc.vdsl.sh" 
#<--
#set DSLMOD
[ "${DSLMOD}" != "" ] && sed -i -e "s/local DSLMODE=.*$/local DSLMODE=${DSLMOD}/" "${SRC}/etc/init.d/rc.vdsl.sh" 
# still not usabele with PPPoA becaus we would need drv_vianx.co for 2.6.13.1.ohio kernelversion
if [ "${USE_SRC2_VINAX_ADSLFW}" = "y" ] || [ "${ANNEX}" = "A" ]; then  
 if  ! [ -f "${SRC_2}"/lib/modules/vinax_fw_adsl_${ANNEX}.bin ]; then
  echo
  echo
  echo "  Annex ${ANNEX} VINAX driver missing! Select 7570 firmware as 3rd firmware!" 
  sleep 20
  exit 0
 else
  rm -fr "${SRC}"/lib/modules/vinax_fw_*.bin
  cp "${SRC_2}"/lib/modules/vinax_fw_adsl_${ANNEX}.bin "${SRC}"/lib/modules/vinax_fw_adsl.bin 
  cp "${SRC_2}"/lib/modules/vinax_fw_vdsl.bin "${SRC}"/lib/modules/vinax_fw_vdsl.bin 
  sed -i -e "s/dsl_pipe lllcs  0 -1 -1 -1 -1 -1 -1 -1 -1 -1 01E0 0 -1 -1 -1 -1 -1 1/dsl_pipe lllcs  0 -1 -1 -1 -1 -1 -1 -1 -1 -1 2 0 -1 -1 -1 -1 -1 1/" "${SRC}/etc/init.d/rc.vdsl.sh"
  sed -i -e "s/dsl_pipe lllcs  0 -1 -1 -1 -1 -1 -1 -1 -1 -1 1 1 -1 -1 -1 -1 -1 0/dsl_pipe lllcs  0 -1 -1 -1 -1 -1 -1 -1 -1 -1 2 0 -1 -1 -1 -1 -1 0/" "${SRC}/etc/init.d/rc.vdsl.sh"

  # following line ends in sementation fault
  #[ -f "${SRC_2}"/etc/init.d/rc.vdsl.sh ] && cp -fdprv "${SRC_2}"/etc/init.d/rc.vdsl.sh  --target-directory="${SRC}"/etc/init.d &&\
  sed -i -e "s/vinax_fw_adsl_\${ANNEX}.bin/vinax_fw_adsl.bin/" "${SRC}/etc/init.d/rc.vdsl.sh"
  sed -i -e 's/drv_vinax major_number=253 vnx_ppp_mode=$VNX_PPP vnx_vpi=$VPI vnx_vci=$VCI/drv_vinax major_number=253 vinax_fw_version=0x953a02/' "${SRC}/etc/init.d/rc.vdsl.sh"
  ### Still not usabele with PPPoA because we would need drv_vianx.co for 2.6.13.1.ohio kernelversion, use the following three lines if kernelversion is correct
  ### [ -f "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/vinax/drv_vinax.ko ] && cp -fdrpv "${SRC_2}"/lib/modules/$KernelVersion2/kernel/drivers/vinax/drv_vinax.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/vinax
  ### sed -i -e 's/drv_vinax major_number=253/drv_vinax major_number=253 vnx_ppp_mode=$VNX_PPP vnx_vpi=$VPI vnx_vci=$VCI/' "${SRC}/etc/init.d/rc.vdsl.sh" 
  ### sed -i -e 's/vinax_fw_version=0x953a02//' "${SRC}/etc/init.d/rc.vdsl.sh"
  #### [ ! -L "${SRC}/lib/modules/$KernelVersion2" ] && ln -s "/lib/modules/$KernelVersion" "${SRC}/lib/modules/$KernelVersion2"
 fi
fi

#VDSL would not start if wrong HWrevision is in use, so it only can be set in ATA mod
#But pluginsupport needs AVM HWrevision to setup the download URL for plugins 

#dont think it is needed, but for safty
sed -i -e '/CONFIG_VDSL=/a\
export CONFIG_VINAX="y"' "${SRC}/etc/init.d/rc.conf" 
#<---DSL skripts
#else
#remove ADSL
#dont start dsl (not usable - tiatm is not starting)
#sed -i -e 's|/etc/init.d/rc.dsl.sh start||' "${SRC}/etc/init.d/rc.S" 
#rm -f "${SRC}"/lib/modules/microvoip-dsl.bin
#<-- ATA only
fi
#remove some unused files
echo2 "  -- removing files for further image size reduction:"
$sh_DIR/remove_files_503_721.sh ${SRC}
rm -rf $VERBOSE ${SRC}/lib/libacsrpc* | sed "s/.*\//\t'/"
# pcmlink boot error, da modul nicht kompatibel ist
rm -f "${SRC}"/lib/modules/c55*

#workaround for HWRevision
if [ "${ENFORCE_HWREVISION}" != "y" ]; then
if [ -f "${SRC}/sbin/start_plugin.sh" ]; then
sed -i -e "/url=\"\`\/sbin\/pluginurl\`\"/i\
	export HWRevision=\"$FBHWRevision\"" "${SRC}/sbin/start_plugin.sh"
sed -i -e "/url=\"\`\/sbin\/pluginurl\`\"/a\
	export HWRevision=\"$HWID\"" "${SRC}/sbin/start_plugin.sh"
fi
fi
sed -i -e "s|hardware=\${HWRevision}|hardware=${FBHWRevision}|" "${SRC}/etc/init.d/rc.conf"

#tests 
sed -i -e '/export ANNEX_TEST/a\
if [ "$STATUS_TEST" != "0" ]; then\
/usr/bin/dsl_info.sh /&\
fi' "${SRC}/etc/init.d/rc.S" 
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
echo "-- Matching Versions: $AVM_VERSION-$AVM_SUBVERSION - $TCOM_VERSION-$TCOM_SUBVERSION"
if [ ${FORCE_TCOM_PIGLET} = "y" ]; then
    [ -d "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/Piglet_noemf ] && PIGLET="Piglet_noemif"
    [ -d "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/Piglet ] && PIGLET="Piglet"
    rm -fr "${SRC}"/lib/modules/$KernelVersion/kernel/drivers/char/Piglet
    rm -fr "${SRC}"/lib/modules/$KernelVersion/kernel/drivers/char/Piglet_noemif
    cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/$PIGLET --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/char
fi

#xilix W721 driver must be for the hardware in use
rm -fr "${SRC}"/lib/modules/microvoip_isdn_top.bit1
[ -e "${DST}"/lib/modules/microvoip_isdn_top.bit ] && cp -fdrp "${DST}"/lib/modules/microvoip_isdn_top.bit --target-directory="${SRC}"/lib/modules &&\
echo "-- Xilinx bitfile was taken from the original base firmware"
[ -e "${DST}"/lib/modules/bitfile.bit ] && cp -fdrp "${DST}"/lib/modules/bitfile.bit "${SRC}"/lib/modules/microvoip_isdn_top.bit &&\
echo "-- Xilinx bitfile was taken from the original base firmware"




# dont add if rc.S is coppyed
if [ "$CPYPSEC" == "y" ]; then
#adapt parameters for Piglet bitfile it is 7170 firmware
$sh_DIR/patch_pigletsection.sh "${SRC}" "${DST}"
#if section was not set correct it must be 7113 firmware, not needed becaus 7113 firmware is also not the clue
grep -q "piglet_enable_switch=3" "${SRC}/etc/init.d/rc.S" || sed -i -e '/piglet_bitfile=/a \
piglet_bitfile=/lib/modules/microvoip_isdn_top.bit${HWRevision_BitFileCount}\
piglet_load_params="\\\
piglet_width_running=1 \\\
piglet_usb_power_bit=-1 \\\
piglet_disable_test=1 \\\
piglet_cs=5 \\\
piglet_reset_bit=-2 \\\
piglet_bitfile_offset=0 \\\
piglet_bitfile_write=-1 \\\
piglet_bitfile_revbytes=1 \\\
piglet_enable_button2=1 \\\
"\
if [ "$HWRevision_BitFileCount" = "1" ] ; then\
piglet_load_params="$piglet_load_params piglet_enable_switch=3"\
fi\
modprobe Piglet piglet_bitfile=$piglet_bitfile $piglet_load_params' "${SRC}/etc/init.d/rc.S"

sed -i -e '/modprobe Piglet_noemif piglet_bitfile=$piglet_bitfile piglet_potsbitfile=$piglet_potsbitfile $piglet_load_params/d' "${SRC}/etc/init.d/rc.S"
#echo "--------------------------------------------------------------------------------------------------------------------------------------------------"
#remove dect and usb 
#x#  sed -i -e '/mknod .var.flash.aura-usb c/d' "${SRC}/etc/init.d/rc.S"
sed -i -e '/mknod .var.flash.dect_misc c/d' "${SRC}/etc/init.d/rc.S"
sed -i -e '/mknod .var.flash.dect_eeprom c/d' "${SRC}/etc/init.d/rc.S"
sed -i -e '/mknod .var.flash.dmgr_handset_user c/d' "${SRC}/etc/init.d/rc.S"
#x# sed -i -e '/mknod .var.flash.configd c/d' "${SRC}/etc/init.d/rc.S"
sed -i -e "/dect_misc/,/dmgr_handset_user/d" "${SRC}/etc/init.d/rc.S"
#remove USB config
sed -i -e "/#### USB-Host Config ####/,/#### USB-Client Config ####/d" "${SRC}/etc/init.d/rc.S"
#remove DECT config
sed -i -e "s/copy_dect_defaults()/copy_dect()/" "${SRC}/etc/init.d/rc.S"
sed -i -e "/modprobe dect_io/d" "${SRC}/etc/init.d/rc.S"
#sleep 10
fi
#enable button
sed -i -e 's/piglet_enable_button=2/piglet_enable_button=3/' "${SRC}/etc/init.d/rc.S" 
#Annex A is not usable up to now
#patch annex parameter
$sh_DIR/patch_annex.sh "${SRC}"
#++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# set led definition 
if [ -f "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/led_module.ko ] && [ ${FORCE_TCOM_LEDDRIVER} = "y" ]; then
    cp -fdrp "${DST}"/lib/modules/$KernelVersion/kernel/drivers/char/led_module.ko --target-directory="${SRC}"/lib/modules/$KernelVersion/kernel/drivers/char
    cp -fdrp "${DST}"/lib/libled* --target-directory="${SRC}"/lib
    cp -fdrp "${DST}"/bin/led* --target-directory="${SRC}"/bin
    cp -fr "${DST}"/bin/update_led_on ${SRC}/bin/update_led_on
    cp -fr "${DST}"/bin/update_led_off ${SRC}/bin/update_led_off
    echo "-- LED driver was taken from the original base firmware!"
fi
$sh_DIR/patch_leddefinition.sh "${SRC}" "${DST}"
# add missing gives
$sh_DIR/add_vdslscale.sh "${SRC}"
# 721 
$sh_DIR/patch_config_rc.conf.sh "${SRC}" "${DST}" 721
# add language timezone country
$sh_DIR/add_multi_settings.sh
#remove menus 
[ ${REMOVE_MENU_ITEM} = "y" ] && $sh_DIR/rmv_menus.sh "${SRC}" "${FBMOD}"
#Add buchsend button to fon bookpage
[ "${ADD_PHONESEND}" = "y" ] && $sh_DIR/patch_fonbuch.sh "${SRC}"

# skripts for startig ftp on USB
#cp -fdpr  ./addon/tmp/jp   --target-directory="${SRC}"

echo "********************************************************************************"
#if this is not corrected no webintaface is present with most firmwares
sed -i -e "s|HWRevision_ATA=0|HWRevision_ATA=1|" "${SRC}/etc/init.d/rc.conf"


#remove kids and help
if [ "${REMOVE_KIDS}" = "y" ]; then
    $sh_DIR/rmv_kids.sh "${SRC}"
    rm -fr ${SRC}/usr/www/kids
    rm -rf ${SRC}/bin/usermand
    rm -fr ${SRC}/lib/modules/$KernelVersion/kernel/drivers/userman
fi
[ "${REMOVE_HELP}" = "y" ] && $sh_DIR/rmv_help.sh "${SRC}"

#echo2 "Removing files for further image size reduction:"
#$sh_DIR/remove_files_721.sh ${SRC}

#remove programme menu entry
DIRI="${SRC}/usr/www/${OEMLINK}/html/de/menus"
for FILE in `ls "${DIRI}"/*`; do  
    sed -i -e "/'software','extern'/d" $FILE
done
#copy tcom ar7.cfg to avm and set Vlan7 as defoult
[ "${FORCE_VLAN7}" = "y" ] && $sh_DIR/add_vlan_in_ar7.cfg.sh