MAKE1=make
MAKE=make -j$(FREETZ_JLEVEL)
HOSTCC:=gcc

HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \
	-e 's/sparc.*/sparc/' \
	-e 's/arm.*/arm/g' \
	-e 's/m68k.*/m68k/' \
	-e 's/ppc/powerpc/g' \
	-e 's/v850.*/v850/g' \
	-e 's/sh[234]/sh/' \
	-e 's/mips-.*/mips/' \
	-e 's/mipsel-.*/mipsel/' \
	-e 's/cris.*/cris/' \
	-e 's/i[3-9]86/i386/' \
	)
GNU_HOST_NAME:=$(HOST_ARCH)-pc-linux-gnu

REAL_GNU_TARGET_NAME:=mipsel-linux-uclibc
GNU_TARGET_NAME:=mipsel-linux

ifeq ($(strip $(FREETZ_TARGET_NLS)),y)
DISABLE_NLS:=
else
DISABLE_NLS:=--disable-nls
endif

ifeq ($(strip $(FREETZ_TARGET_LFS)),y)
DISABLE_LARGEFILE:=
CFLAGS_LARGEFILE=-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
else
DISABLE_LARGEFILE:=--disable-largefile
CFLAGS_LARGEFILE=-D_FILE_OFFSET_BITS=32
endif

TARGET_CROSS:=$(strip $(subst ",, $(FREETZ_TARGET_CROSS)))
TARGET_MAKE_PATH:=$(strip $(subst ",, $(FREETZ_TARGET_MAKE_PATH)))
KERNEL_CROSS:=$(strip $(subst ",, $(FREETZ_KERNEL_CROSS)))
KERNEL_MAKE_PATH:=$(strip $(subst ",, $(FREETZ_KERNEL_MAKE_PATH)))
TARGET_CFLAGS:=$(strip $(subst ",, $(FREETZ_TARGET_CFLAGS))) $(CFLAGS_LARGEFILE)

ifneq ($(patsubst /%,/,$(TARGET_MAKE_PATH)),/)
TARGET_MAKE_PATH:=$(FREETZ_BASE_DIR)/$(TARGET_MAKE_PATH)
endif
ifneq ($(patsubst /%,/,$(KERNEL_MAKE_PATH)),/)
KERNEL_MAKE_PATH:=$(FREETZ_BASE_DIR)/$(KERNEL_MAKE_PATH)
endif

TARGET_CC:=$(TARGET_MAKE_PATH)/$(TARGET_CROSS)gcc
TARGET_CXX:=$(TARGET_MAKE_PATH)/$(TARGET_CROSS)g++-uc
TARGET_LD:=$(TARGET_MAKE_PATH)/$(TARGET_CROSS)ld
TARGET_STRIP:=$(TARGET_MAKE_PATH)/$(TARGET_CROSS)strip --remove-section={.comment,.note,.pdr}

TARGET_PATH:=$(TARGET_MAKE_PATH):/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
# A better name for TARGET_CONFIGURE_OPTS would be TARGET_CONFIGURE_ENV, but that would require changes to all makefiles
# usage is deprecated
# see also TARGET_CONFIGURE_OPTIONS
# NOTE: defined with "=", not with ":="
TARGET_CONFIGURE_OPTS = $(TARGET_CONFIGURE_ENV)

# commands to run before calling configure
# each command has to be terminated by ';'
TARGET_CONFIGURE_PRE_CMDS:=
TARGET_CONFIGURE_PRE_CMDS += $(RM) config.{cache,status} ;

# setup environment for configure
TARGET_CONFIGURE_ENV:=
TARGET_CONFIGURE_ENV += PATH="$(TARGET_PATH)"

# Set compiler/linker flags here, not in TARGET_CONFIGURE_OPTIONS,
# because this way they do not disturb old configure scripts
# (e.g. pjproject, OPIE)
TARGET_CONFIGURE_ENV += CC="$(TARGET_CC)"
TARGET_CONFIGURE_ENV += CXX="$(TARGET_CXX)"
TARGET_CONFIGURE_ENV += CFLAGS="$(TARGET_CFLAGS)"
TARGET_CONFIGURE_ENV += CXXFLAGS="$(TARGET_CFLAGS)"
TARGET_CONFIGURE_ENV += LDFLAGS=""

#TARGET_CONFIGURE_ENV += AR="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)ar"
#TARGET_CONFIGURE_ENV += AS="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)as"
#TARGET_CONFIGURE_ENV += LD="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)ld"
#TARGET_CONFIGURE_ENV += NM="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)nm"
#TARGET_CONFIGURE_ENV += CC="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)gcc"
#TARGET_CONFIGURE_ENV += GCC="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)gcc"
#TARGET_CONFIGURE_ENV += CXX="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)g++"
#TARGET_CONFIGURE_ENV += RANLIB="$(TARGET_MAKE_PATH)/$(TARGET_CROSS)ranlib"

# Common options for configure
TARGET_CONFIGURE_OPTIONS:=
TARGET_CONFIGURE_OPTIONS += --cache-file=$(FREETZ_BASE_DIR)/$(MAKE_DIR)/config.cache
TARGET_CONFIGURE_OPTIONS += --target=$(GNU_TARGET_NAME)
TARGET_CONFIGURE_OPTIONS += --host=$(GNU_TARGET_NAME)
TARGET_CONFIGURE_OPTIONS += --build=$(GNU_HOST_NAME)
TARGET_CONFIGURE_OPTIONS += --program-prefix=""
TARGET_CONFIGURE_OPTIONS += --program-suffix=""
TARGET_CONFIGURE_OPTIONS += --prefix=/usr
TARGET_CONFIGURE_OPTIONS += --exec-prefix=/usr
TARGET_CONFIGURE_OPTIONS += --bindir=/usr/bin
TARGET_CONFIGURE_OPTIONS += --datadir=/usr/share
TARGET_CONFIGURE_OPTIONS += --includedir=/usr/include
TARGET_CONFIGURE_OPTIONS += --infodir=/usr/share/info
TARGET_CONFIGURE_OPTIONS += --libdir=/usr/lib
TARGET_CONFIGURE_OPTIONS += --libexecdir=/usr/lib
TARGET_CONFIGURE_OPTIONS += --localstatedir=/var
TARGET_CONFIGURE_OPTIONS += --mandir=/usr/share/man
TARGET_CONFIGURE_OPTIONS += --sbindir=/usr/sbin
TARGET_CONFIGURE_OPTIONS += --sysconfdir=/etc
TARGET_CONFIGURE_OPTIONS += --with-gnu-ld
TARGET_CONFIGURE_OPTIONS += $(DISABLE_NLS)
TARGET_CONFIGURE_OPTIONS += $(DISABLE_LARGEFILE)

DL_SITE:=$(strip $(subst ",, $(FREETZ_DL_SITE)))
DL_SOURCE:=$(strip $(subst ",, $(FREETZ_DL_SOURCE)))

ifneq ($(strip $(FREETZ_DL_SOURCE2)),)
DL_SITE2:=$(strip $(subst ",, $(FREETZ_DL_SITE2)))
DL_SOURCE2:=$(strip $(subst ",, $(FREETZ_DL_SOURCE2)))
endif

ifneq ($(strip $(FREETZ_DL_SOURCE2_CONTAINER)),)
DL_SOURCE2_CONTAINER:=$(strip $(subst ",, $(FREETZ_DL_SOURCE2_CONTAINER)))
DL_SOURCE2_CONTAINER_SUFFIX:=$(suffix $(DL_SOURCE2_CONTAINER))
endif

### Convenience macros
# Since the makefiles for the packages contain many similar parts, we define some macros to simplify
# the creation and maintenance of the makefiles.
# macro names containing _INT are for internal use only and should not be called outside of this file
# For details of the required targets, see the documentation in README.Makefiles


# PKG_EDIT_CONFIG
# update a config file
#   $(1) = list of assignments CONFIG_VAR=value
PKG_EDIT_CONFIG__INT0 = -e 's%^(\# )?($1)[ =].*%$(if $(patsubst n,,$2),\2=$2,\# \2 is not set)%g'
PKG_EDIT_CONFIG__INT1 = $(call PKG_EDIT_CONFIG__INT0,$(word 1,$(subst =, ,$1)),$(word 2,$(subst =, ,$1)))
PKG_EDIT_CONFIG = $(SED) -i -r $(foreach asg,$1,$(call PKG_EDIT_CONFIG__INT1,$(asg)))

# PKG_FIX_LIBTOOL_LA
#   fix directories is libtool .la files and .pc files
PKG_FIX_LIBTOOL_LA__INT = -e "s,^$1=('?)(.*)('?)$$,$1=\1$(TARGET_TOOLCHAIN_STAGING_DIR)\2\3,g"
PKG_FIX_LIBTOOL_LA = sed -i -r $(foreach key,libdir includedir prefix exec_prefix,$(call PKG_FIX_LIBTOOL_LA__INT,$(key)))


# Use $< (first prerequisite) rather than $^ (all prerequisites), because
# otherwise there will be errors when make tries to copy multiple source files
# into one target binary.
define INSTALL_BINARY_STRIP
mkdir -p $(dir $@)
cp $< $@
$(TARGET_STRIP) $@
endef

### PKG_INIT - initialise package. See also PKG_FINISH.

# Stage 1: initialise package names
#   $(1) = version (mandatory)
#   $(2) = lower-case package name (optional)
#   $(3) = upper-case package name (optional)
define PKG_INIT__INT
#PKG_MAKEFILE:=$(lastword $(MAKEFILE_LIST))
PKG_MAKEFILE:=$(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST))
PKG_BASENAME:=$(basename $(notdir $(PKG_MAKEFILE)))
$(if $(strip $1),,$(error Undefined version for PKG_INIT in $(PKG_MAKEFILE)))
pkg:=$(if $(strip $2),$(strip $2),$(PKG_BASENAME))
PKG:=$(if $(strip $3),$(strip $3),$(shell echo "$(pkg)" | tr '[a-z\-]' '[A-Z_]'))
#
$(PKG)_VERSION:=$(strip $1)
$(PKG)_CONFIGURE_DEFOPTS:=y
# $(pkg)-precompiled--int must be the first target, it will depend on DEPENDS_ON
$(pkg)-precompiled : $(pkg)-precompiled--int $(pkg)
.PHONY: $(pkg)-precompiled $(pkg)-precompiled--int $(pkg)

endef

# Stage 2a: initialise other package-specific variables for binary packages
define PKG_INIT_BIN__INT
PKG_TYPE:=BIN
$(PKG)_DIR:=$(SOURCE_DIR)/$(pkg)-$($(PKG)_VERSION)
# level 99 for packages that are not actually started
$(PKG)_STARTLEVEL=99
$(PKG)_MAKE_DIR:=$(MAKE_DIR)/$(pkg)
$(PKG)_TARGET_DIR:=$(PACKAGES_DIR)/$(pkg)-$($(PKG)_VERSION)
$(PKG)_DEST_DIR:=$(PACKAGES_DIR)/$(pkg)-$($(PKG)_VERSION)/root
endef

# Stage 2b: initialise other package-specific variables for library packages
define PKG_INIT_LIB__INT
PKG_TYPE:=LIB
$(PKG)_DIR:=$(SOURCE_DIR)/$(pkg)-$($(PKG)_VERSION)
$(PKG)_MAKE_DIR:=$(MAKE_DIR)/libs
$(PKG)_TARGET_DIR:=root/usr/lib
$(PKG)_DEST_DIR:=root
endef

# Stage 3: Common definitions after BIN/LIB specific definitions
define PKG_INIT__INT3
$(PKG)_DEST_BIN:=$($(PKG)_DEST_DIR)/bin
$(PKG)_DEST_SBIN:=$($(PKG)_DEST_DIR)/sbin
$(PKG)_DEST_LIB:=$($(PKG)_DEST_DIR)/lib
$(PKG)_DEST_USR_BIN:=$($(PKG)_DEST_DIR)/usr/bin
$(PKG)_DEST_USR_SBIN:=$($(PKG)_DEST_DIR)/usr/sbin
$(PKG)_DEST_USR_LIB:=$($(PKG)_DEST_DIR)/usr/lib
endef

define PKG_INIT_BIN__INTV
$(value PKG_INIT__INT)
$(value PKG_INIT_BIN__INT)
$(value PKG_INIT__INT3)
endef
# Call & evaluate stages 1,2a,3 for binary packages
define PKG_INIT_BIN
$(eval $(call PKG_INIT_BIN__INTV,$1,$2,$3))
endef

define PKG_INIT_LIB__INTV
$(value PKG_INIT__INT)
$(value PKG_INIT_LIB__INT)
$(value PKG_INIT__INT3)
endef
# Call & evaluate stages 1,2b,3 for library packages
define PKG_INIT_LIB
$(eval $(call PKG_INIT_LIB__INTV,$1,$2,$3))
endef



### PKG_FINISH - package finalisation

# Finalise binary packages
define PKG_FINISH_BIN__INT
# Binary dirclean
$(pkg)-dirclean--int:
	$(RM) -r $($(PKG)_DIR)
	$(RM) -r $($(PKG)_TARGET_DIR)
	$(RM) $(PACKAGES_DIR)/.$(pkg)-$($(PKG)_VERSION)
$(PKG_LIST)
endef

# Finalise library packages (currently empty)
define PKG_FINISH_LIB__INT
# Library dirclean
$(pkg)-dirclean--int:
	$(RM) -r $($(PKG)_DIR)
endef

# Finalise packages (general functionality + call to type specifics)
define PKG_FINISH__INT
$(pkg)-dirclean: $(pkg)-dirclean--int
.PHONY: $(pkg)-dirclean $(pkg)-dirclean--int
$(pkg)-precompiled--int : uclibc $(patsubst %,%-precompiled,$($(PKG)_DEPENDS_ON)) 
PKG:=
pkg:=
PKG_TYPE:=
endef
PKG_FINISH=$(eval $(PKG_FINISH_$(PKG_TYPE)__INT))$(eval $(PKG_FINISH__INT))


### PKG_SOURCE_DOWNLOAD - download source packages

define PKG_SOURCE_DOWNLOAD__INT
$(DL_DIR)/$($(PKG)_SOURCE): | $(DL_DIR)
	tools/freetz_download $(DL_DIR) .config $($(PKG)_SOURCE) $($(PKG)_SITE) $($(PKG)_SOURCE_MD5)

$(pkg)-download: $(DL_DIR)/$($(PKG)_SOURCE)
.PHONY: $(pkg)-download
endef
PKG_SOURCE_DOWNLOAD=$(eval $(PKG_SOURCE_DOWNLOAD__INT))


### PKG_UNPACK - unpack source archive & apply patches
# Naming conventions for patches are different for library vs. binary packages,
# therefore we have two different macros.

# tar options for uncompression by file extension
PKG_UNPACK__INT_.tar:=
PKG_UNPACK__INT_.gz:=z
PKG_UNPACK__INT_.tgz:=z
PKG_UNPACK__INT_.bz2:=j
PKG_UNPACK__INT_.tbz:=j
PKG_UNPACK__INT_.lzma:=a
PKG_UNPACK__INT_.tlz:=a
PKG_UNPACK__INT_.zip:=dummy
# $1: package name
define PKG_UNPACK__INT
	$(if $(PKG_UNPACK__INT_$(suffix $(strip $1))),,$(error Unknown filetype in "$(strip $1)"))
	$(if $(patsubst %.zip,%,$(suffix $(strip $1))),
		tar -C $(SOURCE_DIR) $(VERBOSE) -x$(PKG_UNPACK__INT_$(suffix $(strip $1)))f $(strip $1),
		unzip -u $(strip $1) -d $(SOURCE_DIR)
	)
endef

# Unpack, without patch, but only if source package is defined
define PKG_UNPACK
	$(if $($(PKG)_SOURCE),$(call PKG_UNPACK__INT, $(DL_DIR)/$($(PKG)_SOURCE)))
endef

### PKG_PATCH - apply patches

# $1: directory containing the patches
# $2: directory to apply the patches to
# $3: optional name for library patches
define PKG_PATCH__INT
	shopt -s nullglob; for i in $(strip $1)/*$(strip $3).patch; do \
		$(PATCH_TOOL) $(strip $2) $$$$i; \
	done
endef

# Patch binary package
define PKG_BIN_PATCH
	$(call PKG_PATCH__INT, $($(strip $(PKG))_MAKE_DIR)/patches, $($(strip $(PKG))_DIR), )
endef

# Patch library package
define PKG_LIB_PATCH
	$(call PKG_LIB_PATCH__INT, $(PKG), .$(strip $(pkg)))
	$(call PKG_PATCH__INT, $($(strip $(PKG))_MAKE_DIR)/patches, $($(strip $(PKG))_DIR), .$(strip $(pkg)))
endef

## Unpack and patch binary package
define PKG_UNPACKED_BIN__INT
$($(PKG)_DIR)/.unpacked: $(DL_DIR)/$($(PKG)_SOURCE) | $(SOURCE_DIR)
	$(RM) -r $($(PKG)_DIR)
	$(call PKG_UNPACK)
	$(call PKG_BIN_PATCH)
	touch $$@
$(pkg)-source: $($(PKG)_DIR)/.unpacked
$(pkg)-unpacked: $($(PKG)_DIR)/.unpacked
.PHONY: $(pkg)-source $(pkg)-unpacked

$(PACKAGES_DIR)/.$(pkg)-$($(PKG)_VERSION):
	mkdir -p $($(PKG)_TARGET_DIR)/root
	if test -d $($(PKG)_MAKE_DIR)/files; then \
		tar -c -C $($(PKG)_MAKE_DIR)/files --exclude=.svn . | tar -x -C $($(PKG)_TARGET_DIR) ; \
	fi
	@touch $$@
$(pkg) $(pkg)-precompiled: $(PACKAGES_DIR)/.$(pkg)-$($(PKG)_VERSION)
.PHONY: $(pkg) $(pkg)-precompiled
endef

## Unpack and patch library package
define PKG_UNPACKED_LIB__INT
$($(PKG)_DIR)/.unpacked: $(DL_DIR)/$($(PKG)_SOURCE)
	$(call PKG_UNPACK)
	$(call PKG_LIB_PATCH)
	touch $$@
$(pkg)-source: $($(PKG)_DIR)/.unpacked
$(pkg)-unpacked: $($(PKG)_DIR)/.unpacked
.PHONY: $(pkg)-source $(pkg)-unpacked
endef

## only used for BIN packages.
define PKG_UNPACKED__INT
$(PKG)_FREETZ_CONFIG_FILE:=$($(PKG)_MAKE_DIR)/.$(pkg)_config
$(PKG)_FREETZ_CONFIG_TEMP:=$($(PKG)_MAKE_DIR)/.$(pkg)_config.temp
endef

## check for changed suboptions
# should only be called if $(PKG)_CONFIG_SUBOPTS is defined
define PKG_UNPACKED_CHECK_SUBOPTS__INT
$($(PKG)_FREETZ_CONFIG_FILE): $(TOPDIR)/.config
	@($(foreach OPT,$($(PKG)_CONFIG_SUBOPTS),echo "$(OPT)=$(if $($(OPT)),y,n)";) : ) > $($(PKG)_FREETZ_CONFIG_TEMP)
	@diff -q $($(PKG)_FREETZ_CONFIG_TEMP) $($(PKG)_FREETZ_CONFIG_FILE) || \
		cp $($(PKG)_FREETZ_CONFIG_TEMP) $($(PKG)_FREETZ_CONFIG_FILE)
	@$(RM) $($(PKG)_FREETZ_CONFIG_TEMP)
$($(PKG)_DIR)/.unpacked: $($(PKG)_FREETZ_CONFIG_FILE)

endef

PKG_BIN_UNPACKED=$(eval $(PKG_UNPACKED_BIN__INT))
PKG_LIB_UNPACKED=$(eval $(PKG_UNPACKED_LIB__INT))
PKG_UNPACKED=$(eval $(PKG_UNPACKED__INT))$(eval $(PKG_UNPACKED_$(PKG_TYPE)__INT)) \
	$(if $($(PKG)_CONFIG_SUBOPTS),$(eval $(PKG_UNPACKED_CHECK_SUBOPTS__INT)))

### Configure package
define PKG_CONFIGURED_COMMON__INT
#$($(PKG)_DIR)/.configured : $(patsubst %,%-precompiled,$($(PKG)_DEPENDS_ON))
$(pkg)-configured : $($(PKG)_DIR)/.configured
.PHONY: $(pkg)-configured
endef
## Configure package, using ./configure
define PKG_CONFIGURED_CONFIGURE__INT
# Must be first
$(PKG_CONFIGURED_COMMON__INT)
$($(PKG)_DIR)/.configured: $($(PKG)_DIR)/.unpacked
	( cd $($(PKG)_DIR); \
		$(TARGET_CONFIGURE_PRE_CMDS) \
		$($(PKG)_CONFIGURE_PRE_CMDS) \
		source $(FREETZ_BASE_DIR)/$(MAKE_DIR)/config.mipsel ; \
		$(TARGET_CONFIGURE_ENV) \
		$($(PKG)_CONFIGURE_ENV) \
		./configure \
		$(if $(findstring y,$($(PKG)_CONFIGURE_DEFOPTS)), $(TARGET_CONFIGURE_OPTIONS)) \
		$($(PKG)_CONFIGURE_OPTIONS) \
	)
	touch $$@
endef
PKG_CONFIGURED_CONFIGURE=$(eval $(PKG_CONFIGURED_CONFIGURE__INT))

## Package needs no configuration
define PKG_CONFIGURED_NOP__INT
# Must be first
$(PKG_CONFIGURED_COMMON__INT)
$($(PKG)_DIR)/.configured: $($(PKG)_DIR)/.unpacked
	touch $$@
endef
PKG_CONFIGURED_NOP=$(eval $(PKG_CONFIGURED_NOP__INT))


## Add package to static or dynamic list
define PKG_LIST__INT
$(pkg)-list:
ifeq ($(strip $(FREETZ_PACKAGE_$(PKG))),y)
	@echo "S$(strip $($(PKG)_STARTLEVEL))$(pkg)-$($(PKG)_VERSION)" >> .static
else
	@echo "S$(strip $($(PKG)_STARTLEVEL))$(pkg)-$($(PKG)_VERSION)" >> .dynamic
endif
.PHONY: $(pkg)-list
endef
PKG_LIST=$(eval $(PKG_LIST__INT))