echo
echo
echo "-------------------------------------------------------------------------------------------"

## On linux parport must be useable
# Only run this one time at start to setup the paralel port.
############################################################
## remove existing modules
#rmmod lpt
#rmmod lp
#rmmod parport_pc
#rmmod ppdev
#rmmod parport
## setup new parport
#mknod /dev/parport0 c 99 0 -m 666
#modprobe parport
## not needed
## modprobe ppdev
## for checking
## lsmod | more
############################################################
rm log
make clean
make
sleep 10
echo "-------------------------------------------------------------------------------------------"

# Example: Chain with 4 devicese and instruction length 5 for each device:
# Hir= Header Insructionregister
# Tir= Trailer Insructionregister
# Hdr= Header Dataregister
# Tdr= Trailer Dataregister
#    (Hir, Tir, Hdr, Tdr)
#To program device #1, the following parameters:
#       (15, 0, 3, 0)
#To program device #2, the following parameters:
#       (10, 5, 2, 1)
#To program device #3, the following parameters:
#       (5, 10, 1, 2)
#To program device #4, the following parameters:
#       (0, 15, 0, 3)

#Example: Chain with 3 devicese and instruction length 6, 3, 5 for each device:
#    (Hir, Tir, Hdr, Tdr)
#To program device #1, the following parameters:
#       ( 9, 0, 2, 0)
#To program device #2, the following parameters:
#       ( 5, 6, 1, 1)
#To program device #3, the following parameters:
#       ( 0, 8, 0, 2)


#./wrt54g -backup:custom  /skipdetect /silent /hir:9 /tir:0 /hdr:2 /tdr:0 /window:90000000 /start:90000000 /length:20000 /dv:1
#/debug2 >log
#./wrt54g -backup:custom  /skipdetect /silent /hir:0 /tir:8 /hdr:0 /tdr:2 /window:90000000 /start:90000000 /length:20000 /dv:3
#/debug2 >log
# Not all parameter need to be specified usual /hir:X or /tir:X is sufficiant. /hir:0 /tir:0 /hdr:0 /tdr:0 is default.
#./wrt54g -backup:custom  /skipdetect /silent /hir:9 /window:90000000 /start:90000000 /length:20000
#/debug2 >log
#./wrt54g -backup:custom /skipdetect /silent /tir:8 /window:90000000 /start:90000000 /length:20000 /dv:3
#/debug2 >log
#!!!!!!!!!!!!!!!!!!!!!!#
# If bypass Option is in use only /skipdetect /dv:X must be specified to select the decired device. /dev:1 is default.
./wrt54g -backup:custom /bypass /skipdetect /silent /window:90000000 /start:90000000 /length:20000 /dv:1 /fc:21 
#/debug1
#/debug2 > log
#./wrt54g -backup:custom /bypass /skipdetect /silent /window:90000000 /start:90000000 /length:20000 /dv:3
#/debug2 >log

# Option test for checking pin assignment of adapter.
# /test
# Option debug2 generates a total trace step by step.
#/debug2 >log
# Option debug1 generates trace of flasch read/writes 
#/debug1 >log

#cat log | more
# (7141 and W701 "/hir:9 /hdr:2") 
# (7050 "/hir:4 /hdr:1")
#sleep 2
#./start
echo "All done .... Press 'ENTER' to return to the calling shell."
while !(read -s); do
    sleep 1
done

exit 0