menu "Removal patches" comment "Removal patches ------------------------" config FREETZ_REMOVE_MICROVOIP_DSL bool "Remove microvoip-dsl.bin" depends on \ FREETZ_AVM_HAS_MICROVOIP_DSL && \ FREETZ_REMOVE_TELEPHONY default n help Remove the files lib/modules/microvoip-dsl.bin and lib/modules/2.6.13.1-*/kernel/drivers/atm/avm_atm/tiatm.ko This saves about 590-700 KB of uncompressed data size. config FREETZ_REMOVE_ANNEX_B_FIRMWARE bool "Remove Annex B firmware" depends on \ FREETZ_SHOW_ADVANCED && \ FREETZ_TYPE_7270_V1 default n help Remove lib/modules/dsp_*/*-B-dsl.bin. This saves about 330-400 KB of uncompressed data size. config FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_DIFFS bool "Remove 2nd Annex firmware" depends on FREETZ_AVM_HAS_MULTI_ANNEX default n help Remove the diffs to the prime firmware. This saves about 120-230 KB of uncompressed data size and 67 KB of bspatch. Select this only if you don't want to switch the firmware. See http://www.wehavemorefun.de/fritzbox/Multi-DSL-Firmware config FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_PRIME bool "Remove 1st Annex firmware" depends on FREETZ_SHOW_ADVANCED && \ FREETZ_AVM_HAS_MULTI_ANNEX && \ FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_DIFFS default n help This saves about 340-790 KB of uncompressed data size. Removes lib/modules/dsp_*/*-?-dsl.bin or lib/modules/*Vx180Code.bin.gz. Select this only if you don't use the the DSL modem. See http://www.wehavemorefun.de/fritzbox/Multi-DSL-Firmware config FREETZ_REMOVE_DSL_CONTROL bool "Remove dsl_control" depends on \ ( \ FREETZ_REMOVE_ANNEX_A_FIRMWARE || \ FREETZ_REMOVE_ANNEX_B_FIRMWARE || \ FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_PRIME \ ) && ( \ FREETZ_SYSTEM_TYPE_AR9 || \ FREETZ_SYSTEM_TYPE_VR9 \ ) default n help Removes /usr/sbin/dsl_control. This saves about 540-669 KB of uncompressed data size. Select this only if you don't use the the DSL modem. See http://wehavemorefun.de/fritzbox/Dsl_control config FREETZ_REMOVE_PIGLET_V1_AVAILABLE bool default y if \ (FREETZ_TYPE_7170 && ! FREETZ_TYPE_ALIEN_HARDWARE) || \ FREETZ_TYPE_W701V_7170 || \ FREETZ_TYPE_W900V_7170 || \ FREETZ_TYPE_IAD_3331_7170 default n config FREETZ_REMOVE_PIGLET_V2_AVAILABLE bool default y if FREETZ_TYPE_7170 default n config FREETZ_REMOVE_PIGLET_ISDN_AVAILABLE bool default y if \ (FREETZ_AVM_HAS_PIGLET_ISDN && FREETZ_REMOVE_DSLD && FREETZ_REMOVE_TELEPHONY) || \ FREETZ_TYPE_7113 || FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_7340 || FREETZ_TYPE_7340_7390 default n config FREETZ_REMOVE_PIGLET_POTS_AVAILABLE bool default y if \ (FREETZ_AVM_HAS_PIGLET_POTS && FREETZ_REMOVE_DSLD && FREETZ_REMOVE_TELEPHONY) || \ FREETZ_TYPE_7113 || FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_7340 || FREETZ_TYPE_7340_7390 default n menu "Remove piglet" depends on \ FREETZ_REMOVE_PIGLET_V1_AVAILABLE || \ FREETZ_REMOVE_PIGLET_V2_AVAILABLE || \ FREETZ_REMOVE_PIGLET_ISDN_AVAILABLE || \ FREETZ_REMOVE_PIGLET_POTS_AVAILABLE config FREETZ_REMOVE_PIGLET_V1 bool "Remove v1 piglet file(s)" depends on FREETZ_REMOVE_PIGLET_V1_AVAILABLE help The firmware of this model contains double piglet files. Which instance is needed depends on the hardware version (v1 or v2) of your box. You can safely remove the unneeded instance. Hint: If "echo $HWRevision_BitFileCount" returns "1" you could select this patch. config FREETZ_REMOVE_PIGLET_V2 bool "Remove v2 piglet file(s)" depends on FREETZ_REMOVE_PIGLET_V2_AVAILABLE help The firmware of this model contains double piglet files. Which instance is needed depends on the hardware version (v1 or v2) of your box. You can safely remove the unneeded instance. Hint: If "echo $HWRevision_BitFileCount" returns "" (nothing) you could select this patch. comment "WARNING: Both (v1 and v2) piglet files are selected for removal." depends on FREETZ_REMOVE_PIGLET_V1 && FREETZ_REMOVE_PIGLET_V2 config FREETZ_REMOVE_PIGLET_ISDN bool "Remove ISDN piglet file(s)" depends on FREETZ_REMOVE_PIGLET_ISDN_AVAILABLE help The firmware of this model contains separate piglet files for ISDN and POTS. Depending on your type of fixed line usage you can safely remove the unneeded bitfile(s). Hint: If you are using POTS fixed line you can try to select this patch. Be careful! Sometimes even POTS models are using the ISDN files and not the POTS ones. If your box ends up in a reboot cycle, you should deselect this patch and maybe want to try the other one, even if you are using POTS. config FREETZ_REMOVE_PIGLET_POTS bool "Remove POTS piglet file(s)" depends on FREETZ_REMOVE_PIGLET_POTS_AVAILABLE help The firmware of this model contains separate piglet files for ISDN and POTS. Depending on your type of fixed line usage you can safely remove the unneeded bitfile(s). Hint: If you are using ISDN fixed line you could select this patch. comment "WARNING: Both (ISDN and POTS) piglet files are selected for removal." depends on FREETZ_REMOVE_PIGLET_ISDN && FREETZ_REMOVE_PIGLET_POTS endmenu config FREETZ_REMOVE_ASSISTANT bool "Remove assistant (wizard)" default n depends on \ ! ( \ ( \ FREETZ_TYPE_5124 || \ FREETZ_TYPE_7140 || \ FREETZ_TYPE_7170 \ ) \ && FREETZ_TYPE_LANG_EN \ ) help Removes the installation assistant from the web menu. config FREETZ_REMOVE_ASSISTANT_SIP bool "Remove SIP assistant" default n depends on FREETZ_REMOVE_ASSISTANT help Removes the SIP configuration assistant (about 155kB uncompressed) from the web menu. With this patch you can't create new phones, but change and use existing ones. config FREETZ_REMOVE_AHA bool "Remove AHA (AVM Home Automation)" default n depends on FREETZ_AVM_HAS_AHA help Remove the aha daemon and some related files. Used for "Smart Home". This patch only removes the files, not the settings in AVM's web interface. config FREETZ_REMOVE_AURA_USB bool "Remove AURA (AVM USB Remote-Architecture)" default n depends on FREETZ_AVM_HAS_AURA_USB help Remove the aura-usb-daemon (remote USB connection, USB-Fernanschluss) and some related files. This patch only removes the files, not the settings in AVM's web interface. config FREETZ_REMOVE_ETHERNET_OVER_USB bool "Remove ethernet-over-usb" depends on FREETZ_AVM_HAS_ETHERNET_OVER_USB select FREETZ_REMOVE_CDROM_ISO if FREETZ_AVM_HAS_CDROM_ISO default n help Removes avalanche_usb.ko to save 60kB uncompressed space. This is the Ethernet-over-USB driver which provides also CDROM emulation. config FREETZ_REMOVE_MEDIASRV bool "Remove mediasrv" depends on \ (FREETZ_AVM_HAS_USB_HOST && !FREETZ_TYPE_7270_V1) || \ FREETZ_TYPE_7112_7170 || \ FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_W701V_7170 default n help Remove the MediaServer-daemon (mediasrv) and some other related files. This patch hides also the MediaServer options in the Web UI, so you must disable it before flashing the new image. Saves compressed 230 KB on a 7270_V2 and 40 KB on a 7170. config FREETZ_REMOVE_NAS bool "Remove NAS" default n depends on FREETZ_AVM_HAS_NAS select FREETZ_REMOVE_MEDIASRV help Removes the AVM NAS Webinterface and internal memory file (saves about 390 KB in compressed image). config FREETZ_REMOVE_MYFRITZ bool "Remove MyFritz" default n depends on FREETZ_AVM_HAS_MYFRITZ select FREETZ_REMOVE_NAS if FREETZ_AVM_HAS_NAS help Removes the AVM MyFritz Webinterface. Saves about 1.1 MB uncompressed data size. config FREETZ_REMOVE_FHEM bool "Remove FHEM" default n depends on FREETZ_AVM_HAS_FHEM help Removes the FHEM scripts and kernel modules (cdc_acm & ftdi_sio). This saves about 100 KB, uncompressed. config FREETZ_REMOVE_AVM_VPN bool "Remove VPN" default n depends on \ FREETZ_AVM_VERSION_05_2X_MIN || \ FREETZ_TYPE_2170 || \ FREETZ_TYPE_3170 || \ FREETZ_TYPE_7150 || \ (FREETZ_TYPE_7170 && FREETZ_TYPE_LANG_DE) || \ FREETZ_TYPE_7270_V1 || \ FREETZ_TYPE_7570 help Remove AVM's vpn and some other related files This patch removes the files and related Web UI entrys, but not the vpn settings. This will save about 120kB compressed size. config FREETZ_REMOVE_WEBSRV bool "Remove websrv" depends on \ FREETZ_AVM_VERSION_04_XX_MAX \ && ! FREETZ_TYPE_2170 \ && ! FREETZ_TYPE_3131 \ && ! FREETZ_TYPE_3170 \ && ! FREETZ_TYPE_5124 \ && ! FREETZ_TYPE_5140 \ && ! FREETZ_TYPE_7112 \ && !(FREETZ_TYPE_7113 && FREETZ_TYPE_LANG_EN) \ && !(FREETZ_TYPE_7140 && FREETZ_TYPE_LANG_EN) \ && !(FREETZ_TYPE_7140 && FREETZ_TYPE_LANG_A_CH) \ && ! FREETZ_TYPE_7141 \ && ! FREETZ_TYPE_7170 \ && ! FREETZ_TYPE_7270_V1 \ && ! FREETZ_TYPE_7570 \ && !(FREETZ_TYPE_300IP && FREETZ_TYPE_LANG_EN) \ && !(FREETZ_TYPE_FON && FREETZ_TYPE_LANG_EN) \ && !(FREETZ_TYPE_WLAN && FREETZ_TYPE_LANG_EN) default n help Patch init scripts so BusyBox's httpd is used instead of AVM's websrv. The websrv binary will be removed from the firmware image. If "Remove UPnP daemon (igdd/upnpd)" patch is also selected, 'libwebsrv.so' will be removed too, because only those two binaries use it. comment "No brandings available to remove" depends on FREETZ_TYPE_W501V menu "Remove brandings" depends on !FREETZ_TYPE_W501V && !FREETZ_SYSTEM_TYPE_PUMA6 comment "avm and tcom branding can't be removed" depends on FREETZ_TYPE_ALIEN_HARDWARE config FREETZ_REMOVE_BRANDING_1und1 bool "1&1" depends on \ FREETZ_TYPE_LANG_DE && \ ( \ FREETZ_TYPE_FON || \ FREETZ_TYPE_WLAN || \ FREETZ_TYPE_3020 || \ FREETZ_TYPE_3030 || \ FREETZ_TYPE_3130 || \ FREETZ_TYPE_5050 || \ FREETZ_TYPE_5140 || \ FREETZ_TYPE_7050 || \ FREETZ_TYPE_7112 || \ FREETZ_TYPE_7113 || \ FREETZ_TYPE_7141 || \ FREETZ_TYPE_7170 || \ FREETZ_TYPE_7240 || \ FREETZ_TYPE_7270 || \ FREETZ_TYPE_7312 || \ FREETZ_TYPE_7320 || \ FREETZ_TYPE_7330 || \ FREETZ_TYPE_7340 || \ FREETZ_TYPE_7360 || \ FREETZ_TYPE_7390 || \ FREETZ_TYPE_7412 || \ FREETZ_TYPE_7490 \ ) default n help 1&1 branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_avm bool "AVM" depends on \ ( \ FREETZ_TYPE_LANG_A_CH || \ FREETZ_TYPE_LANG_DE \ ) \ && ! FREETZ_TYPE_ALIEN_HARDWARE default n help AVM branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_avme bool "AVM international" depends on \ FREETZ_TYPE_LANG_EN default n help AVM international branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_ewetel bool "ewetel" depends on \ FREETZ_TYPE_LANG_DE && FREETZ_AVM_VERSION_06_2X_MIN && \ ( \ FREETZ_TYPE_7360_V1 || \ FREETZ_TYPE_7390 \ ) default n help EWE TEL branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_otwo bool "otwo" depends on \ FREETZ_TYPE_7270_V3 || \ (FREETZ_TYPE_7390 && FREETZ_AVM_VERSION_06_0X_MIN) default n help O2 branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_aol bool "AOL" depends on \ FREETZ_TYPE_LANG_DE && \ ( \ FREETZ_TYPE_300IP || \ FREETZ_TYPE_FON || \ FREETZ_TYPE_WLAN || \ FREETZ_TYPE_7140 \ ) default n help AOL branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_freenet bool "Freenet" depends on \ FREETZ_TYPE_LANG_DE && \ ( \ FREETZ_TYPE_300IP || \ FREETZ_TYPE_FON || \ FREETZ_TYPE_7150 || \ FREETZ_TYPE_7112 || \ FREETZ_TYPE_7113 || \ FREETZ_TYPE_7141 \ ) default n help Freenet branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) config FREETZ_REMOVE_BRANDING_versatel bool "Versatel" depends on FREETZ_TYPE_3131 default n help Versatel branding Each branding provides the web UI templates for a certain manufacturer or OEM. NOTE: Make sure not to remove the branding corresponding to the one defined in your box's boot loader environment. It can be determined by calling the following command from the box's shell prompt: echo $(cat /proc/sys/urlader/firmware_version) endmenu config FREETZ_REMOVE_CAPIOVERTCP bool "Remove CAPIoverTCP" depends on FREETZ_AVM_HAS_PHONE default n help Remove CAPIoverTCP (capiotcp_server). Use this if you don't want to use Fritz!Fax or any other program that uses AVM's CAPIoverTCP. This is similar to rcapid, but independant. This will save about 15kB uncompressed size. config FREETZ_REMOVE_CHRONYD bool "Remove chronyd" depends on FREETZ_AVM_HAS_CHRONYD default n help Removes AVM's time synchronization tool (chrony) and related files. This will save about 220kB uncompressed size. config FREETZ_REMOVE_CDROM_ISO bool "Remove cdrom.iso" depends on FREETZ_AVM_HAS_CDROM_ISO default n help Removes the file /lib/modules/cdrom.iso to save 270kB uncompressed space. config FREETZ_REMOVE_DECT bool "Remove DECT" depends on FREETZ_AVM_HAS_DECT select FREETZ_REMOVE_AHA if FREETZ_AVM_HAS_AHA default n help Remove dect files (modules, dect_manager and dect related Web UI). This saves 20K compressed size on W900V and 360k on 7240/7270. WARNING: While *configuring* telephony ctlmgr may crash and corrupt you settings! config FREETZ_REMOVE_DECT_UPDATE bool "Remove dect_update" depends on FREETZ_TYPE_7150 default n help Remove /usr/bin/dect_update. This utility is only needed to update the dect firmware. This will save about 32kB uncompressed size. config FREETZ_REMOVE_DSLD bool "Remove dsld" default n select FREETZ_REMOVE_UPNP select FREETZ_REMOVE_KIDS if ! \ ( \ FREETZ_TYPE_5140 || \ FREETZ_TYPE_7112 || \ FREETZ_TYPE_7113 || \ FREETZ_TYPE_W501V \ ) help Remove DSL daemon (dsld), if you are planning to use your box as a simple IP client in ATA mode. ATTENTION: You won't be able to use your box as a modem nor a router anymore. As well do *not* use this option if your ATA mode box uses PPoE passthrough, because in this case dsld is still needed! Furthermore, selecting this patch also selects the UPnP patch, because UPnP must be deactivated anyway for IP clients, otherwise dsld will be used again. You can find the UPnP settings in the German web UI under Einstellungen System Netzwerkeinstellungen Statusinformationen ueber UPnP uebertragen (empfohlen) Thirdly, the usermand patch will also be selected if you activate this option, because kernel module userman.ko always depends on kdsldmod.ko which is stripped by this patch. config FREETZ_REMOVE_SHOWDSLDSTAT bool "Remove showdsldstat" default n help Removes the showdsldstat utility which shows you the cpmac mode, connect time, external ip, route and dns servers. Also the state of IPv6, voip and tr069. Unsure a.t.m. if this tool is required by other AVM programs! AVM-WebDAV will be patched to not depend on showdsldstat (hopefully). config FREETZ_REMOVE_DTRACE bool "Remove dtrace" depends on \ FREETZ_AVM_VERSION_05_2X_MIN || \ FREETZ_TYPE_5124 || \ FREETZ_TYPE_7150 || \ FREETZ_TYPE_7113 || \ FREETZ_TYPE_7141 || \ FREETZ_TYPE_7170 || \ FREETZ_TYPE_7270_V1 || \ FREETZ_TYPE_7570 default y help Remove /usr/bin/dtrace. This utility is only needed to trace ISDN D-channel. This will save about 87kB uncompressed size. config FREETZ_REMOVE_FTPD bool "Remove ftpd" depends on \ FREETZ_AVM_HAS_USB_HOST || \ FREETZ_TYPE_7112_7170 || \ FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_W701V_7170 default n help Remove FTP daemon (ftpd) This patch removes AVM's ftp daemon. The regular options in AVM's Webinterface are still present. If you select this item your USB drives won't be accessible through ftp anymore. But you can use Freetz bftpd/vsftpd package to grant ftp access to the devices. config FREETZ_REMOVE_HELP bool "Remove help" default n help Removes the (offline) help pages from the web menu. config FREETZ_REMOVE_LIBFUSE bool "Remove libfuse.so" depends on \ ( \ FREETZ_TYPE_7570 || \ FREETZ_TYPE_7270_V1 \ ) select FREETZ_REMOVE_NTFS if FREETZ_AVM_HAS_NTFS && !FREETZ_AVMPLUGINS_NTFS select FREETZ_REMOVE_WEBDAV if FREETZ_AVM_HAS_WEBDAV default n help This removes libfuse.so and saves about 132 KB (uncompressed). NTFS and Webdav are also removed. config FREETZ_REMOVE_EXT2 bool "Remove ext2.ko" default n depends on FREETZ_AVM_HAS_USB_HOST && !FREETZ_AVM_HAS_EXT2_BUILTIN help Remove ext2.ko (about 81 kB uncompressed / 24 kB compressed). config FREETZ_REMOVE_ISOFS bool "Remove isofs.ko" default n depends on FREETZ_AVM_HAS_ISOFS_MODULE help Remove isofs.ko (about 35 kB uncompressed). config FREETZ_REMOVE_JFFS2 bool "Remove jffs2.ko" depends on FREETZ_AVM_HAS_JFFS2_MODULE default n help If your AVM firmware contains the JFFS2 kernel module (jffs2.ko), this patch removes it, saving 144-192 kB of uncompressed firmware space. Use this patch if you have space problems in your firmware ("image too big"). Please note that every functionality based on JFFS2, such as telephone answering machine (tam) storage without USB storage media, will no longer work. But if you have space problems to begin with, JFFS would be too small to store anything anyway. In either case it is preferable to store phone calls, fax documents etc. on a USB storage medium. This patch does *not* change any scripts which might require JFFS, so use at your own risk and test the firmware after flashing it onto your device. config FREETZ_REMOVE_RAMZSWAP bool "Remove ramzswap.ko" default n depends on FREETZ_AVM_HAS_RAMZSWAP_MODULE help Remove ramzswap.ko (about 35 kB uncompressed). config FREETZ_REMOVE_LSOF bool "Remove lsof" depends on FREETZ_AVM_HAS_LSOF default n help Remove /bin/lsof binary. This saves about 48 KB compressed space in kernel.image. config FREETZ_REMOVE_SOCAT bool "Remove socat" depends on FREETZ_AVM_HAS_SOCAT default y help Remove /sbin/socat binary. This saves about 247 KB compressed space in kernel.image. config FREETZ_REMOVE_MINID bool "Remove minid (Fritz!Mini and MT-D/F)" default n depends on FREETZ_AVM_HAS_MINID help Remove the mini-daemon (minid) and some other related files. This patch removes Fritz!Mini and MT-D/F support and all Web UI entrys. Saves compressed 660 KB on a 7270_V3 and 460 KB on a 7170. ATTENTION: You must remove all Fritz!Mini's from your Fritz!Box configuration and delete all Mini users with the Gini! software to avoid complications. config FREETZ_REMOVE_FAT bool "Remove FAT" depends on \ ! FREETZ_AUTOMOUNT_FAT && \ FREETZ_AVM_HAS_USB_HOST && \ ! FREETZ_TYPE_7270_16 default n help Remove FAT modules This patch will remove fat.ko, vfat.ko and msdos.ko. Be careful, mounting volumes with this filesystem will not work. It saves about 80-135K compressed space in kernel.image. config FREETZ_REMOVE_NTFS bool "Remove NTFS" depends on \ FREETZ_AVM_HAS_NTFS && \ ! FREETZ_AVMPLUGINS_NTFS default n help Remove NTFS support This patch will remove ntfs-3g dependent files from the firmware. Be careful, mounting volumes with this filesystem will not work. It saves about 118K compressed space in kernel.image. config FREETZ_REMOVE_NLS bool "Remove NLS" depends on FREETZ_AVM_HAS_USB_HOST default n help Remove NLS support This patch will remove all the nls_*.ko kernel module from the firmware. This may affect mounting FAT, NTFS and other filesystems. You can add some of the Freetz kernel nls modules if you need them. config FREETZ_REMOVE_USBHOST bool "Remove USB Host" depends on FREETZ_AVM_HAS_USB_HOST default n help Remove USB Host This patch will remove all the kernel modules needed for the USB Host from the firmware. You will not be able to use USB storage or USB printers unless you provide a way to download and install these modules at runtime. Selecting this patch does not automatically select the patches to remove the kernel modules for the file systems (EXT2, FAT, NTFS, ...) config FREETZ_REMOVE_PRINTSERV bool "Remove printserv" depends on \ FREETZ_AVM_HAS_USB_HOST || \ FREETZ_TYPE_7112_7170 || \ FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_W701V_7170 default n help Remove /sbin/printserv daemon. Select this patch if you don't want to connect a printer to your box or if you plan to use usb/ip package. Saves about 8 KB of compressed space. config FREETZ_REMOVE_PRINTSERV_MODULE bool "Remove usblp.ko" depends on FREETZ_REMOVE_PRINTSERV && \ ! FREETZ_MODULE_usblp default n help Remove usblp kernel module. Without this module it's not possible to run a printer on your box. Saves about 12 KB of compressed space. config FREETZ_REMOVE_RUNCLOCK bool "Remove run_clock" default n help Remove /bin/run_clock (operating hours meter) daemon. This saves about 5K compressed space in kernel.image. config FREETZ_REMOVE_SAMBA bool "Remove Samba (smbd/nmbd)" depends on \ !FREETZ_PACKAGE_SAMBA_SMBD && \ ( \ (FREETZ_AVM_HAS_USB_HOST && !FREETZ_TYPE_7270_V1) || \ FREETZ_TYPE_7112_7170 || \ FREETZ_TYPE_7113_7170 || \ FREETZ_TYPE_W701V_7170 \ ) default n help Remove Samba daemons (smbd, and nmbd if available) This patch removes only the daemons. The regular options in AVM's webinterface are still present. config FREETZ_REMOVE_SUPPORT bool "Remove support-files" default n help Remove the support-files which can be taken by http://fritz.box/html/support.html or http://fritz.box/support.lua config FREETZ_REMOVE_SUPPORT_EVENTSDUMP bool "Remove eventsdump" depends on FREETZ_REMOVE_SUPPORT default n help Remove the eventsdump binary, saves about 6kB (uncompressed). With the file you could dump AVM's "Ereignisse" to the console. Seem to be use only by AVM's support-files. config FREETZ_REMOVE_TR069 bool "Remove tr069" if FREETZ_SHOW_ADVANCED depends on FREETZ_AVM_HAS_TR069 select FREETZ_AVMDAEMON_DISABLE_TR069 default n help Removes libtr069 to save space. This also removes libtr064. config FREETZ_REMOVE_TR069_FWUPDATE bool "Remove fwupdate" depends on FREETZ_REMOVE_TR069 && FREETZ_AVM_HAS_TR069_FWUPDATE default n help Removes the file /usr/bin/tr069fwupdate, needed for updating the firmware in MT-D devices. config FREETZ_REMOVE_TR069_HTTPSDL bool "Remove httpsdl" depends on FREETZ_REMOVE_TR069 && FREETZ_AVM_HAS_TR069_FWUPDATE && FREETZ_REMOVE_TR069_FWUPDATE default y help Removes the file /usr/bin/httpsdl, used by: * tr069/fwupdate, you have removed it * firmware updater, with Freetz you don't want it * some more ? This saves 15-45 KB of uncompressed data size. config FREETZ_REMOVE_TR069_PROVIDERS bool "Remove providers db (s. help)" depends on FREETZ_REMOVE_TR069 && FREETZ_AVM_VERSION_05_2X_MIN && FREETZ_SHOW_EXPERT default n help Removes /etc/default.${BOX}/${OEM}/providers-${ALC}.tar files containing the defaults for many ISPs. Every branding has such a file with up to 310 KB of uncompressed data size for each. WARNING: Enable this patch only if - you already have configured your internet connection, and - don't use any predefined ISP. config FREETZ_REMOVE_UMTSD bool "Remove UMTS (USB GSM)" depends on FREETZ_AVM_HAS_UMTS default n help Remove UMTS support This patch will remove UMTS-dependent files from firmware. It saves about 12K compressed space in kernel.image. config FREETZ_REMOVE_UPNP bool "Remove UPnP (igdd/upnpd)" select FREETZ_AVMDAEMON_DISABLE_IGD select FREETZ_REMOVE_UPNP_LIBS if \ FREETZ_TYPE_2170 || \ FREETZ_TYPE_300IP || \ FREETZ_TYPE_FON || \ FREETZ_TYPE_5010 || \ FREETZ_TYPE_5050 || \ FREETZ_TYPE_5140 || \ FREETZ_TYPE_WLAN || \ FREETZ_TYPE_7050 || \ FREETZ_TYPE_7113 || \ (FREETZ_TYPE_7140 && FREETZ_TYPE_LANG_DE) || \ FREETZ_TYPE_W501V || \ FREETZ_TYPE_3020 || \ FREETZ_TYPE_3030 || \ FREETZ_TYPE_3130 select FREETZ_REMOVE_TR069 if FREETZ_AVM_HAS_TR069 select FREETZ_REMOVE_AURA_USB if FREETZ_AVM_HAS_AURA_USB default n help Remove Universal Plug'n'Play daemon 'igdd/upnpd' and some more files used by it from firmware. Patch init scripts so they can cope with the non-existent binary. ATTENTION: Fritz!Fax relies on UPnP. Make sure you deactivate all UPnP features in the web menu before updating the firmware with this option. It may not be harmful not to deactivate it, but there is no guarantee. You can find the settings in the German web UI under Einstellungen System Netzwerkeinstellungen Statusinformationen ueber UPnP uebertragen (empfohlen) config FREETZ_REMOVE_UPNP_LIBS bool depends on FREETZ_REMOVE_UPNP default n config FREETZ_REMOVE_KIDS bool "Remove kids (usermand/contfiltd)" depends on \ ! FREETZ_TYPE_5140 && \ ! FREETZ_TYPE_7112 && \ ! FREETZ_TYPE_7113 && \ ! FREETZ_TYPE_W501V default n help Remove userman/contfiltd files (Kindersicherung) config FREETZ_REMOVE_QOS bool "Remove QoS (tc)" default n help Removes tc and some kernel modules. The command tc is used by dsld. config FREETZ_REMOVE_AVM_E2FSPROGS bool "Remove e2fsprogs" depends on FREETZ_AVM_HAS_E2FSPROGS select FREETZ_PACKAGE_UTIL_LINUX if FREETZ_AVM_VERSION_05_2X_MIN && !FREETZ_PATCH_FREETZMOUNT default y if FREETZ_PATCH_FREETZMOUNT default n help Removes the e2fsprogs files (blkid, fsck, mkfs) and libraries. Saves about 220KB of compressed space. config FREETZ_REMOVE_VOIPD bool "Remove VoIP" depends on FREETZ_AVM_HAS_PHONE default n help This removes the integrated sip-client and -server and the releated Web menu, normal telefon use (ISDN, POTS and DECT) is not affected. This saves 250 KB on a 7170/7270 of compressed firmware size. Do not select this option if you want to use the answering machine. ATTENTION: You must remove all sip phone numbers and all sip clients before flashing this image. Afterward there is no possibility to remove these numbers because the Web UI is also removed. config FREETZ_REMOVE_TELEPHONY bool "Remove telephony" depends on FREETZ_AVM_HAS_PHONE select FREETZ_REMOVE_DECT if FREETZ_AVM_HAS_DECT select FREETZ_REMOVE_VOIPD select FREETZ_REMOVE_DTRACE select FREETZ_REMOVE_CAPIOVERTCP select FREETZ_REMOVE_MINID if FREETZ_AVM_HAS_MINID default n help Radically remove a lot of telephony-related files. This patch saves about 2370 KB or 2.3 MB of uncompressed data size in the firmware image. This means savings of about 700 KB of compressed firmware size. ATTENTION: Currently there have not been a whole lot of tests concerning side effects. The patch was successfully tested on a W701V IP client with removed UPnP/dsld/userman. If it still works for boxes including those functionalities, is unknown. Feel free to test it. config FREETZ_REMOVE_WEBDAV bool "Remove WebDAV" depends on FREETZ_AVM_HAS_WEBDAV default n help Remove WebDAV (Online-Speicher) feature. Saves about 510 KB of uncompressed data size. On 7270v1 only scripts, links and a 10KB library. config FREETZ_REMOVE_WLAN bool "Remove WLAN" depends on FREETZ_SHOW_ADVANCED && \ FREETZ_AVM_HAS_WLAN default n help Radically remove a lot of wlan-related files. This patch saves about 700 kb of uncomrpessed data size in the firmware image. WARNING: Do not enable Wlan, you will get a reboot loop! endmenu # "Removal patches" # menu "Other patches" comment "Web menu patches -----------------------" config FREETZ_PATCH_VCC bool "Patch 2nd VCC" depends on FREETZ_AVM_HAS_PHONE && FREETZ_TYPE_LANG_DE && FREETZ_AVM_VERSION_05_2X_MAX default n help Patches the setting for 2nd VCC into web menu. It also adds two additional settings (PCR & SCR) not available in the original AVM firmware. Please also note that it is not possible to change the value of traffic_class setting via the web-interface. You have to do it some other way (e.g. using FBEditor or nvi ar7.cfg). Warning: Please read up on what each VCC setting means before setting/changing it. Besides not working wrong values may cause additional costs for you as your provider may treat it as simultaneous dial-in attempts (Doppeleinwahl). The correct values for an 1&1-Komplettanschluss are: VPI = 1; VCI = 35; traffic_class = atm_traffic_class_CBR; pcr = 603; scr = 0; config FREETZ_PATCH_ATA bool "Patch ATA" default n help Patches the ATA mode configuration pages into the web menu. The ATA-Mode (better: IP-Client Mode) disables the DSL modem and routing and reduces the power consumption of a box. Some models disable this feature, most models have brandings or environment configuration which disable the IP-Client Mode. This patch forces the ATA-Mode to be enabled. ATA will not work with some 7170/7140 due to limited hardware, see http://wiki.ip-phone-forum.de/gateways:avm:fbf:kabel config FREETZ_PATCH_ENUM bool "Patch enum" depends on \ FREETZ_TYPE_LANG_DE && \ ( \ FREETZ_TYPE_FON || \ FREETZ_TYPE_300IP || \ FREETZ_TYPE_5050 || \ FREETZ_TYPE_WLAN || \ FREETZ_TYPE_7050 || \ FREETZ_TYPE_7140 \ ) default n help Patches the enum configuration pages into the web menu. config FREETZ_PATCH_BETA_ATTRIBUTES bool "Patch Beta/Labor attributes" depends on \ FREETZ_AVM_VERSION_05_2X && \ !FREETZ_TYPE_ALIEN_HARDWARE && \ FREETZ_TYPE_LANG_DE && \ ( \ FREETZ_TYPE_7270_16 || \ FREETZ_TYPE_7390 \ ) default y help This patch removes Beta/Labor attributes from some (older) firmwares AVM released only as Betas so far. config FREETZ_PATCH_DSL_EXPERT bool "Patch extended DSL settings" depends on \ ! FREETZ_REMOVE_DSLD && \ FREETZ_AVM_VERSION_05_2X_MAX && \ ( \ FREETZ_TYPE_3270 || \ FREETZ_TYPE_3370 || \ FREETZ_TYPE_6840 || \ FREETZ_TYPE_7240 || \ FREETZ_TYPE_7270_16 || \ FREETZ_TYPE_7312 || \ FREETZ_TYPE_7320 || \ FREETZ_TYPE_7330 || \ FREETZ_TYPE_7340 || \ FREETZ_TYPE_7360 || \ FREETZ_TYPE_7390 || \ FREETZ_TYPE_7570 \ || \ FREETZ_TYPE_7112 || \ FREETZ_TYPE_7270_V1 \ || \ FREETZ_TYPE_5113 || \ FREETZ_TYPE_5124 || \ FREETZ_TYPE_7113 || \ FREETZ_TYPE_7140 || \ FREETZ_TYPE_7141 || \ FREETZ_TYPE_7170 \ ) default n help Patches the extended dsl-settings from labor-dsl into all-in-one-firmwares. config FREETZ_ADD_REGEXT_GUI bool "Patch GUI to enable external SIP connections" depends on \ FREETZ_TYPE_7570 || \ ( FREETZ_AVM_VERSION_05_2X_MAX && \ FREETZ_TYPE_LANG_DE && ( \ FREETZ_TYPE_7170 || \ FREETZ_TYPE_7240 || \ FREETZ_TYPE_7270 || \ FREETZ_TYPE_7390 \ ) \ ) default n help Patches the WebUI and add a checkbox to enable setting "reg_from_outside" in the voip.conf. config FREETZ_PATCH_GSMVOICE bool "Patch GSM voice" depends on \ FREETZ_AVM_HAS_UMTS && \ ! FREETZ_REMOVE_UMTSD && \ ! FREETZ_TYPE_7270_V1 default n help Patches the WebUI to allow voice-over-GSM. Highly experimental! Your UMTS stick has to support it. Webif: Internet > Mobilfunk > Telefonie ueber Mobilfunk config FREETZ_PATCH_ALARMCLOCK bool "Patch third alarm-clock" depends on !FREETZ_REMOVE_TELEPHONY && \ ( \ FREETZ_TYPE_7150 || \ FREETZ_TYPE_7112 || \ FREETZ_TYPE_7141 || \ (FREETZ_TYPE_7170 && FREETZ_TYPE_LANG_DE) || \ FREETZ_TYPE_7270_V1 || \ FREETZ_TYPE_7570 \ ) default n help Adds a third alarm-clock to AVM-Webinterface config FREETZ_PATCH_VOL_COUNTER bool "Restore volume counter support" depends on FREETZ_TYPE_7412 && FREETZ_AVM_VERSION_06_8X default n help Adds volume counter support removed by AVM for some (probably marketing) reasons. config FREETZ_PATCH_SIGNED bool "Patch web menu signed message" default n help Hides the "unsupported changes" message from the web interface. config FREETZ_ENABLE_LED_DEACTIVATION bool "Enable LED deactivation page" depends on FREETZ_AVM_VERSION_06_0X_MIN default n help Re-enables access to the LED deactivation page in expert mode. if FREETZ_AVM_HAS_USB_HOST comment "USB patches --------------------" config FREETZ_PATCH_FREETZMOUNT bool "FREETZMOUNT: Patch AVMs hotplug scripts, USB storage names, ..." select FREETZ_USBSTORAGE_AUTOMOUNT select FREETZ_BUSYBOX_BLKID if FREETZ_REMOVE_AVM_E2FSPROGS || !FREETZ_AVM_HAS_E2FSPROGS select FREETZ_BUSYBOX_FEATURE_BLKID_TYPE if FREETZ_REMOVE_AVM_E2FSPROGS || !FREETZ_AVM_HAS_E2FSPROGS select FREETZ_BUSYBOX_VOLUMEID default y help 1. Replaces and deselects usb-storage patch. - The names of USB storage directories can be defined by WebIF (default uStorXY) (or by volume LABEL). 2. Replaces and deselects autorun.sh/autoend.sh patch. - autorun/autoend behaviour can be activated/deactivated via WebIF. - autorun/autoend are useful to start/terminate applications located on USB devices, eg apache, samba or even swapfiles, after connecting or before disconnecting of USB devices. 3. Auto-mounted USB storage devices will be fully accessible, eg it is now possible to put user home directories for (e.g. for FTP) on a FAT32-formatted partition and permit shell and FTP users to actually write to their own home directories. 4. Avoid deleting whole filesystems on USB devices. 5. Enhanced behaviour during mounting and unmounting. 6. Provides mount-by-label feature. It is highly recommended to select this patch. config FREETZ_USBSTORAGE_AUTOMOUNT bool "Automount filesystems" depends on FREETZ_PATCH_FREETZMOUNT default y help The filesystems ext2, ext3, ext4, fat, hfs, hfs+, ntfs and reiserfs and swap are mounted automatically. Detection is done by blkid utility . It depends on the original firmware which of the following points you have to select. if FREETZ_USBSTORAGE_AUTOMOUNT config FREETZ_AUTOMOUNT_EXT2 bool "ext2" depends on (FREETZ_REPLACE_MODULE_AVAILABLE || FREETZ_AVM_HAS_EXT2_BUILTIN) # && any kernel version select FREETZ_BUSYBOX_FEATURE_VOLUMEID_EXT select FREETZ_MODULE_ext2 if ! FREETZ_AVM_HAS_EXT2_BUILTIN default n help This adds support for ext2 filesystem to your firmware. config FREETZ_AUTOMOUNT_EXT3 bool "ext3" depends on (FREETZ_REPLACE_MODULE_AVAILABLE || FREETZ_AVM_HAS_EXT3_BUILTIN) # && any kernel version select FREETZ_BUSYBOX_FEATURE_VOLUMEID_EXT select FREETZ_MODULE_ext3 if ! FREETZ_AVM_HAS_EXT3_BUILTIN default y if FREETZ_AVM_HAS_EXT3_BUILTIN default n help This adds support for ext3 filesystem to your firmware. config FREETZ_AUTOMOUNT_EXT4 bool "ext4" depends on (FREETZ_REPLACE_MODULE_AVAILABLE || FREETZ_AVM_HAS_EXT4_BUILTIN) && FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_BUSYBOX_FEATURE_VOLUMEID_EXT select FREETZ_MODULE_ext4 if ! FREETZ_AVM_HAS_EXT4_BUILTIN default y if FREETZ_AVM_HAS_EXT4_BUILTIN default n help This adds support for ext4 filesystem to your firmware. config FREETZ_AUTOMOUNT_FAT bool "fat" select FREETZ_BUSYBOX_FEATURE_VOLUMEID_FAT default y help This enables detection of fat partitions. config FREETZ_AUTOMOUNT_HFS bool "HFS" depends on FREETZ_REPLACE_MODULE_AVAILABLE select FREETZ_BUSYBOX_FEATURE_VOLUMEID_HFS select FREETZ_MODULE_hfs default n help This adds hfs module to your firmware. config FREETZ_AUTOMOUNT_HFS_PLUS bool "HFS+" depends on FREETZ_REPLACE_MODULE_AVAILABLE select FREETZ_BUSYBOX_FEATURE_VOLUMEID_HFS select FREETZ_MODULE_hfsplus default n help This adds hfs+ module to your firmware. config FREETZ_AUTOMOUNT_LUKS bool "luks" select FREETZ_BUSYBOX_FEATURE_VOLUMEID_LUKS default n help This enables detection (not mounting) of luks partitions. config FREETZ_AUTOMOUNT_NTFS bool "NTFS" depends on (FREETZ_AVM_HAS_NTFS && !FREETZ_REMOVE_NTFS) || FREETZ_REPLACE_MODULE_AVAILABLE select FREETZ_PACKAGE_NTFS if FREETZ_REMOVE_NTFS || ! FREETZ_AVM_HAS_NTFS select FREETZ_BUSYBOX_FEATURE_VOLUMEID_NTFS default y if FREETZ_AVM_HAS_NTFS && ! FREETZ_REMOVE_NTFS default n help This adds ntfs-3g mount helper to your firmware. config FREETZ_AUTOMOUNT_REISER_FS bool "ReiserFS" depends on FREETZ_REPLACE_MODULE_AVAILABLE select FREETZ_BUSYBOX_FEATURE_VOLUMEID_REISERFS select FREETZ_MODULE_reiserfs default n help This adds reiserfs module to your firmware. config FREETZ_AUTOMOUNT_LINUXSWAP bool "swap" select FREETZ_BUSYBOX_FEATURE_VOLUMEID_LINUXSWAP default n help This enables detection of linux-swap partitions. endif config FREETZ_PATCH_MAXDEVCOUNT bool "Raise the count of connectable usb device to 9" default n help Use this patch if you would connect more than 3 device to the box config FREETZ_PATCH_MULTIPLE_PRINTERS bool "Add support for multiple printers" depends on ! FREETZ_REMOVE_PRINTSERV && \ ( \ ( FREETZ_TYPE_7140 && ! FREETZ_TYPE_LANG_DE ) || \ FREETZ_TYPE_7570 || \ FREETZ_TYPE_5124 || \ FREETZ_TYPE_2170 || \ FREETZ_TYPE_3131 || \ FREETZ_TYPE_3170 || \ FREETZ_TYPE_7141 || \ FREETZ_TYPE_7150 || \ FREETZ_TYPE_7170 || \ FREETZ_TYPE_7270_V1 \ ) # no patch available atm: 7140_DE 2070 3070 3050 3130 select FREETZ_BUSYBOX_HEXDUMP default n help Use this patch if you want to use more than one printer. endif config FREETZ_MODIFY_UMTSD bool "Modify umtsd: only for known modems" depends on FREETZ_AVM_HAS_UMTS && FREETZ_AVM_HAS_UDEV && ! FREETZ_REMOVE_UMTSD default n help AVM's umtsd will only be started if a *known* umts modem is detected. So your /dev/ttyUSB? could be used by other programs. config FREETZ_CUSTOM_UDEV_RULES bool "Enable custom UDEV rules" depends on FREETZ_AVM_HAS_UDEV default n help You could use own rules for UDEV. comment "Replacement patches --------------------" config FREETZ_KEEP_AVM_UCLIBC bool "Keep AVM uClibc - FOR TESTING PURPOSES ONLY" depends on FREETZ_SHOW_EXPERT && \ ( \ (FREETZ_AVM_UCLIBC_0_9_28 && FREETZ_TARGET_UCLIBC_0_9_28) || \ (FREETZ_AVM_UCLIBC_0_9_29 && FREETZ_TARGET_UCLIBC_0_9_29) || \ (FREETZ_AVM_UCLIBC_0_9_32 && FREETZ_TARGET_UCLIBC_0_9_32) || \ (FREETZ_AVM_UCLIBC_0_9_33 && FREETZ_TARGET_UCLIBC_0_9_33) || \ (FREETZ_AVM_UCLIBC_1_0_14 && FREETZ_TARGET_UCLIBC_1_0_14) \ ) && \ FREETZ_REAL_DEVELOPER_ONLY default n comment "Replace OpenSSL libraries (not available, requires openssl-0.9.8)" depends on FREETZ_SHOW_ADVANCED && \ FREETZ_AVM_HAS_OPENSSL_VERSION_0 && FREETZ_LIB_libcrypto && !FREETZ_OPENSSL_VERSION_0 config FREETZ_REPLACE_OPENSSL bool "Replace OpenSSL libraries" depends on FREETZ_SHOW_ADVANCED && \ FREETZ_AVM_HAS_OPENSSL_VERSION_0 && FREETZ_LIB_libcrypto && FREETZ_OPENSSL_VERSION_0 select FREETZ_LIB_libssl default n help Use this option only if you are running out of space and if you really know, what you are doing. Activating this option may cause an unstable system, uncontrolled reboots and other side effects. Activating this option saves about 400KB in the image. config FREETZ_REPLACE_DTRACE bool "Replace dtrace" depends on FREETZ_REMOVE_DTRACE default n help Dtrace will be replaced by a symlink to /tmp/flash/mod/dtrace. Activating this option lets you execute a custom action via phone using #97*3* keycode sequence. config FREETZ_REPLACE_ONLINECHANGED bool "Replace onlinechanged - EXPERIMENTAL" depends on FREETZ_SHOW_ADVANCED default n help AVM's built-in onlinechanged is not reliably called on some DSL boxes for unknown reasons (see http://www.ip-phone-forum.de/showthread.php?t=231873). On boxes behind a NAT, e.g. on many IP clients, behind cable routers etc., onlinechanged is not triggered either because dsld is not responsible for the connection. Thus, services on such boxes cannot be reinitialised automatically after the external IP address has changed. This is where this patch can be useful: It starts a shell script /sbin/ip_watchdog via /etc/inittab and makes sure the script is automatically restarted (via "respawn") in case it is terminated accidentally. The script periodically (60 s) checks the external IP via /usr/bin/get_ip and calls AVM's and Freetz's onlinechanged scripts via /bin/onlinechanged.sh if the IP has changed. At the same time the patch ensures that AVM's master script /bin/onlinechanged is empty, so the scripts are not called twice. Who should use this patch? First of all users with boxes configured for NAT who cannot profit from AVM onlinechanged at all. Secondly users having problems with AVM onlinechanged being called unreliably on their DSL boxes. Limitations: Environment variable IPADDR is set as usual, but no other variables set by AVM multid in original onlinechanged such as NETMASK, GATEWAY, DNS1, DNS2. They are currently not used by AVM or Freetz scripts anyway, so this limitation should not be a problem. Another difference to AVM onlinechanged is that this solution only calls "onlinechanged online", never "onlinechanged offline". This also should not be a problem, but you should be aware of it. comment "Additional patches ---------------------" config FREETZ_ADD_ETCSERVICES bool "Add /etc/services" default y select FREETZ_PACKAGE_MOD_ETCSERVICES help Adds /etc/services file. Used eg by netstat to display names of IP-ports. config FREETZ_ADD_ANNEX_A_FIRMWARE bool "Add Annex A firmware file" depends on FREETZ_TYPE_7270_V1 default n help Add lib/modules/dsp_ur8/ur8-A-dsl.bin. This costs about 400 KB of uncompressed data size. But you can remove Annex B file if you plan to use Annex A. config FREETZ_ENFORCE_URLADER_SETTINGS bool "Enforce urlader environment" depends on FREETZ_SHOW_ADVANCED default n help Enforce some urlader (Adam2/EVA) environment variables. * useful for tcom boxes having non-AVM standard settings in bootloader (my_ipaddress, firmware_version, ProductID) * useful for people that do clear mtd3/mtd4 often. This settings are enforced at the beginnig of the boot process. config FREETZ_ENFORCE_URLADER_SETTING_FIRMWARE_VERSION depends on FREETZ_ENFORCE_URLADER_SETTINGS string "Enforce firmware_version variable" default "avm" if FREETZ_TYPE_IAD_3331_7170 help Choose wisely. Your image beeing built must support this. Typical settings are eg.: avm, avme, tcom, 1und1, ... If this is empty the urlader setting won't be touched. config FREETZ_ENFORCE_URLADER_SETTING_PRODUCTID depends on FREETZ_ENFORCE_URLADER_SETTINGS string "Enforce ProductID variable" default "" help Choose wisely. Your image beeing built must support this. Typical settings are eg.: Fritz_Box_DECT_7270, Fritz_Box_DECT_W920V If this is empty the urlader setting won't be touched. config FREETZ_ENFORCE_URLADER_SETTING_MY_IPADDRESS depends on FREETZ_ENFORCE_URLADER_SETTINGS string "Enforce my_ipaddress variable" default "" help This is the AVM default, enforce to also to reseller boxes, eg. from T-Com If this is empty the urlader setting won't be touched. config FREETZ_ENFORCE_FIRMWARE_VERSION_VIA_RCCONF depends on FREETZ_AVM_VERSION_06_5X_MIN string "Enforce firmware_version via rc.conf" default "" help This option enforces branding by hardcoding it in /etc/init.d/rc.conf This method is useful on some recently produced boxes (since 2017), which do not allow to change the value of the urlader variable 'firmware_version' in a non-volatile way. Affected boxes (known so far): all boxes with the following bootloaderVersion - 1.3179 - 1.3229 use "cat /proc/sys/urlader/environment | grep bootloaderVersion" or EVA to check the value Choose the value wisely. Your image must support it. comment "modfs patches --------------------------" config FREETZ_PATCH_MODFS_BOOT_MANAGER bool "Add boot manager" depends on FREETZ_AVM_VERSION_06_5X_MIN depends on FREETZ_AVM_HAS_SEPARATE_FILESYSTEM_IMAGE default n help Extends the "reboot" page of FRITZ!OS to select system version and branding. config FREETZ_PATCH_MODFS_ANNEX_SELECTION bool "Unhide Annex selection" depends on FREETZ_AVM_HAS_MULTI_ANNEX depends on !FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_PRIME && !FREETZ_REMOVE_MULTI_ANNEX_FIRMWARE_DIFFS depends on FREETZ_TYPE_LANG_DE default n help Unhides Annex selection in Fritz!OS web interface. comment "Misc patches ---------------------------" config FREETZ_PATCH_W920V_LED_MODULE bool "Change LED semantics to W920V" default y depends on FREETZ_TYPE_W920V_7570 && FREETZ_AVM_VERSION_04_XX help If Y is choosen, this changes the semantics of the LEDs on the front panel of your 7570/W920V box fitting the descriptions of the W920V. config FREETZ_DISABLE_SERIAL_CONSOLE bool "Disable console on serial port" default n help Choose this if you do not want your Box to start a console/shell on its serial port (/dev/ttyS0). This is particularly helpful if you want to use the serial port exclusively with another application, e.g. minicom. config FREETZ_RESTORE_DEBUG_CFG_SUPPORT bool "Restore support for /var/flash/debug.cfg" depends on !FREETZ_AVM_HAS_DEBUG_CFG_SUPPORT default y help Restores support for /var/flash/debug.cfg removed by AVM for security reasons in Fritz!OS 6.20 (6.0x on some boxes). config FREETZ_DISABLE_DEBUG_CFG_SUPPORT bool "Disable processing of /var/flash/debug.cfg" depends on FREETZ_AVM_HAS_DEBUG_CFG_SUPPORT default n help Disables processing of /var/flash/debug.cfg while booting. Note: /var/flash/debug.cfg is still available, it's however not processed while booting. Warning: if selected you won't be able to install/start such 3rd-party extensions like FHEM, LCR Updater, etc. config FREETZ_ASYNCHRONOUS_DEBUG_CFG bool "Process /var/flash/debug.cfg asynchronously" depends on ( FREETZ_AVM_HAS_DEBUG_CFG_SUPPORT && !FREETZ_DISABLE_DEBUG_CFG_SUPPORT) \ || (!FREETZ_AVM_HAS_DEBUG_CFG_SUPPORT && FREETZ_RESTORE_DEBUG_CFG_SUPPORT) default n help Enables asynchronous processing of /var/flash/debug.cfg. Requires AVM's /sbin/delay binary in order to work. config FREETZ_RUN_TELEFON_IN_INHOUSE_MODE bool "Run telefon daemon in in-house mode" depends on FREETZ_AVM_HAS_PHONE depends on FREETZ_AVM_VERSION_06_5X_MIN default n help Running telefon daemon in "in-house" mode restores - processing of /var/flash/calllog on incoming calls - support for the telnet-on/-off phone codes (#96*7*/#96*8*) - processing of /var/flash/fx_conf attributes responsible for automatic start of the telnet daemon comment "AVM daemons ----------------------------" config FREETZ_AVMDAEMON_DISABLE_IGD bool "Disable igd/upnp" default n help Disables dsld's IGD & multid's UPNP-device config FREETZ_AVMDAEMON_DISABLE_NTP bool "Disable ntp client" default n help Disables multid's basic NTP client config FREETZ_AVMDAEMON_DISABLE_IGM bool "Disable IGMP" default n help Disables multid's IGMP proxy config FREETZ_AVMDAEMON_DISABLE_TR069 bool "Disable tr069" depends on FREETZ_AVM_HAS_TR069 default n help Disables multid's tr069discover config FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS bool "Disable services by preload" select FREETZ_LIB_libmultid default n help This disables some ports bindings of multid by remapping them to higher ones. config FREETZ_AVMDAEMON_DISABLE_DNS bool "Disable DNS" depends on FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS select FREETZ_LIB_libmultid_WITH_DNS default n help Remaps multid's binding of the DNS ports, so another dns-server could be used, avm's dynamic-dns updater and timesync works correct. config FREETZ_AVMDAEMON_DISABLE_DHCP bool "Disable DHCP" depends on FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS select FREETZ_LIB_libmultid_WITH_DHCP default n help Remaps multid's binding of the DHCP port. Don't forget to set up a server for the guest-wlan too. config FREETZ_AVMDAEMON_DISABLE_LLMNR bool "Disable LLMNR" depends on FREETZ_AVMDAEMON_DISABLE_MULTIDPORTS select FREETZ_LIB_libmultid_WITH_LLMNR default n help Remaps multid's binding of both LLMNR ("Link- local Multicast Name Resolution) ports. endmenu # "Other patches" #