config DS_LIB_libgcc_s
	bool "libgcc_s.so.1"
	default n
	help
		GCC low-level runtime library
		
		GCC provides a low-level runtime library, `libgcc.a' or `libgcc_s.so.1'
		on some platforms. GCC generates calls to routines in this library
		automatically, whenever it needs to perform some operation that is too
		complicated to emit inline code for.
		
		Most of the routines in libgcc handle arithmetic operations that the
		target processor cannot perform directly. This includes integer multiply
		and divide on some machines, and all floating-point operations on other
		machines. libgcc also includes routines for exception handling, and a
		handful of miscellaneous operations.

menu "uClibc"

config DS_LIB_ld_uClibc
	bool "ld-uClibc-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libcrypt
	bool "libcrypt-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libdl
	bool "libdl-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libm
	bool "libm-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libnsl
	bool "libnsl-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libpthread
	bool "libpthread-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libresolv
	bool "libresolv-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libuClibc
	bool "libuClibc-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

config DS_LIB_libutil
	bool "libutil-0.9.28.so"
	default n
	help
		uClibc is a small C standard library intended for embedded Linux
		systems. uClibc was created to support uClinux, a version of Linux not
		requiring a memory management unit and thus suited for microcontrollers
		(hence the "uC" in the name - "u" is a replacement for the Greek
		character "miu" often used as an abbreviation for the prefix "micro").
		
		uClibc is much smaller than GNU C Library (glibc), the C library
		normally used with Linux distributions. While glibc is intended to fully
		support all relevant C standards across a wide range of platforms,
		uClibc is specifically focused on embedded Linux. Features can be
		enabled or disabled according to space requirements.

endmenu

config DS_LIB_libuClibcxx
	bool "uClibc++ (libuClibc++-0.2.1.so)"
	default n
	help
		The uClibc++ library is my implementation of the C++ standard library.
		It is designed for use in embedded systems. 

config DS_LIB_libfuse
	bool "FUSE (libfuse.so)"
	default n
	help
		Filesystem in Userspace (FUSE) is a free Unix kernel module that allows
		non-privileged users to create their own file systems without the need
		to write any kernel code. This is achieved by running the file
		systemcode in user space, while the FUSE module only provides a "bridge"
		to the actual kernel interfaces. FUSE was officially merged into the
		mainstream Linux kernel tree in kernel version 2.6.14.
		
		FUSE is particularly useful for writing virtual file systems. Unlike
		traditional filesystems which essentially save data to and retrieve data
		from disk, virtual filesystems do not actually store data themselves.
		They act as a view or translation of an existing filesystem or storage
		device. In principle, any resource available to FUSE implementation can
		be exported as a file system.
		
		In DS-Mod, the NTFS package depends on libfuse, for example.

config DS_LIB_libjpeg
	bool "libjpeg (libjpeg.so)"
	default n
	help
		libjpeg is a library for handling the JPEG (JFIF) image format

config DS_LIB_libgpg_error
	bool "libgpg-error (libgpg-error.so)"
	default n
	help
		Libgpg-error is a small library that defines common error values for all
		GnuPG components. Among these are GPG, GPGSM, GPGME, GPG-Agent,
		libgcrypt, Libksba, DirMngr, Pinentry, SmartCard Daemon and possibly
		more in the future.

config DS_LIB_libgcrypt
	bool "libgcrypt (libgcrypt.so)"
	select DS_LIB_libgpg_error
	select DS_LIB_libnsl
	default n
	help
		Libgcrypt is a general-purpose cryptographic library based on the code
		from GnuPG. It provides functions for all cryptographic building blocks:
		symmetric ciphers (AES, DES, Blowfish, CAST5, Twofish, and Arcfour),
		hash algorithms (MD4, MD5, RIPE-MD160, SHA-1, and TIGER-192), MACs
		(HMAC for all hash algorithms), public key algorithms (RSA, ElGamal,
		and DSA), large integer functions, random numbers, and a lot of
		supporting functions. 

config DS_LIB_libntfs
	bool "NTFS-3G (libntfs-3g.so)"
	default n
	help
		NTFS-3G is a read/write NTFS driver.

config DS_LIB_liblzo2
	bool "LZO (liblzo2.so)"
	default n
	help
		LZO is a portable lossless data compression library written in ANSI C.
		It offers pretty fast compression and *very* fast decompression.
		Decompression requires no memory. In addition there are slower
		compression levels achieving a quite competitive compression ratio while
		still decompressing at this very high speed. 

config DS_LIB_libevent
	bool "libevent (libevent.so)"
	default n
	help
		libevent is an asynchronous event notification software library.
		
		The libevent API provides a mechanism to execute a callback function
		when a specific event occurs on a file descriptor or after a timeout
		has been reached. Furthermore, libevent also support callbacks due to
		signals or regular timeouts.
		
		libevent is meant to replace the event loop found in event-driven
		network servers. An application just needs to call event_dispatch() and
		then add or remove events dynamically without having to change the event
		loop.

config DS_LIB_libmad
	bool "MAD (libmad.so)"
	default n
	help
		MAD is a high-quality MPEG audio decoder. It currently supports MPEG-1
		and the MPEG-2 extension to Lower Sampling Frequencies, as well as the
		so-called MPEG 2.5 format. All three audio layers (Layer I, Layer II,
		and Layer III a.k.a. MP3) are fully implemented.

config DS_LIB_libncurses
	bool "ncurses (libncurses.so)"
	default n
	help
		ncurses is a programming library providing an API, allowing the
		programmer to write text user interfaces in a terminal-independent
		manner. It also optimizes screen changes, in order to reduce the latency
		experienced when using remote shells.
		
		Ncurses stands for "new curses", and is a replacement for the
		discontinued 4.4 BSD classic curses.
		
		In DS-Mod, e.g. Lua, Bird, Lynx and Screen use libncurses.

config DS_LIB_libpcap
	bool "libpcap (libpcap.so)"
	default n
	help
		libpcap is a system-independent interface for user-level packet capture.
		libpcap provides a portable framework for low-level network monitoring.
		Applications include network statistics collection, security monitoring,
		network debugging, etc.
		
		In DS-Mod, e.g. tcpdump, knock and pingtunnel depend on libpcap.

config DS_LIB_libmatrixssl
	bool "MatrixSSL (libmatrixssl.so)"
	select DS_LIB_libpthread
	default n
	help
		MatrixSSL is an open source embedded SSL implementation designed for
		small footprint applications and devices. There are existing open-source
		SSL implementations available and there are existing embedded SSL
		implementations, but there was a notable absence of packages that offer
		both. 
		
		In DS-Mod, matrixtunnel depends on MatrixSSL.

menu "OpenSSL"

config DS_LIB_libcrypto
	bool "libcrypto.so"
	default n
	help
		crypto - OpenSSL cryptographic library
		
		The OpenSSL crypto library implements a wide range of cryptographic
		algorithms used in various Internet standards. The services provided by
		this library are used by the OpenSSL implementations of SSL, TLS and
		S/MIME, and they have also been used to implement SSH, OpenPGP, and
		other cryptographic standards.
		
		libcrypto consists of a number of sub-libraries that implement the
		individual algorithms. The functionality includes symmetric encryption,
		public key cryptography and key agreement, certificate handling,
		cryptographic hash functions and a cryptographic pseudo-random number
		generator. 

config DS_LIB_libssl
	bool "libssl.so"
	select DS_LIB_libcrypto
	default n
	help
		SSL - OpenSSL SSL/TLS library
		
		The OpenSSL ssl library implements the Secure Sockets Layer (SSL v2/v3)
		and Transport Layer Security (TLS v1) protocols. It provides a rich API.
		
		In DS-Mod, e.g. Tor, sTunnel and OpenVPN depend on libssl.

endmenu

menu "Readline"

config DS_LIB_libreadline
	bool "libreadline.so"
	default n
	help
		The Readline library provides a set of functions for use by applications
		that allow users to edit command lines as they are typed in. Both Emacs
		and vi editing modes are available. The Readline library includes
		additional functions to maintain a list of previously-entered command
		lines, to recall and perhaps reedit those lines, and perform csh-like
		history expansion on previous commands.
		
		In DS-Mod, e.g. Lua and Bird depend on libreadline.

config DS_LIB_libhistory
	bool "libhistory.so"
	default n
	select DS_LIB_libreadline
	help
		The Readline library provides a set of functions for use by applications
		that allow users to edit command lines as they are typed in. Both Emacs
		and vi editing modes are available. The Readline library includes
		additional functions to maintain a list of previously-entered command
		lines, to recall and perhaps reedit those lines, and perform csh-like
		history expansion on previous commands.
		
		In DS-Mod, e.g. Lua and Bird depend on libhistory.

endmenu

config DS_LIB_libz
	bool "zlib (libz.so)"
	default n
	help
		zlib is a lossless data-compression library for use on virtually any
		computer hardware and operating system. The zlib data format is itself
		portable across platforms.
		
		In DS-Mod, e.g. Tor, Bftpd and Stunnel depend on zlib.