if !FREETZ_KERNEL_VERSION_3_10_MIN config FREETZ_PACKAGE_IPTABLES bool "Iptables 1.4.11.1 (binary only)" depends on FREETZ_PACKAGE_IPTABLES_IS_SELECTABLE default n help Netfilter/iptables Netfilter is the set of hooks within the Linux kernel for intercepting and manipulating network packets. The best-known component on top of netfilter is the firewall which filters packets, but the hooks are also used by a component which performs network address translation, and by another which provides ipchains backwards compatibility. These components are usually Loadable Kernel Modules. iptables is the name of the user space tool by which administrators create rules for the packet filtering and NAT modules. While technically iptables is merely the tool which controls the packet filtering and NAT components within the kernel, the name iptables is often used to refer to the entire infrastructure, including netfilter, connection tracking and NAT, as well as the tool itself. iptables is a standard part of all modern Linux distributions. config FREETZ_PACKAGE_IPTABLES_IS_SELECTABLE bool default y if \ FREETZ_REPLACE_MODULE_AVAILABLE && \ !FREETZ_TYPE_W501V && \ !FREETZ_TYPE_5140 default n help Select this if you are sure that Iptables should work on your box config FREETZ_PACKAGE_IPTABLES_SAVE_RESTORE bool "Iptables-save / iptables-restore" depends on FREETZ_PACKAGE_IPTABLES default n help iptables-save & iptables-restore config FREETZ_PACKAGE_IPTABLES_XML bool "Iptables-xml" depends on FREETZ_PACKAGE_IPTABLES_SAVE_RESTORE default n help Include iptables-xml to convert saved rules to xml. config FREETZ_PACKAGE_IPTABLES_STATIC bool "Build static binary" depends on FREETZ_PACKAGE_IPTABLES default n help Build a statically linked binary with all libraries compiled in # Include here for a cleaner menu structure (list packages before modules/libs) source make/iptables-cgi/Config.in source make/nhipt/Config.in source make/iptables/Config.in.modules comment "CAUTION: Use of module ip_conntrack can lead to spontaneous reboots" depends on FREETZ_PACKAGE_IPTABLES && \ FREETZ_MODULE_ip_conntrack && \ FREETZ_KERNEL_VERSION_2_6_13 config FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES bool "Iptables kernel modules" depends on FREETZ_PACKAGE_IPTABLES default n help Linux kernel modules for iptables Please note that some kernel modules have corresponding shared libraries and vice versa, so please make sure to select both of them, if they are needed for your purpose. menu "Select kernel modules (IPv4)" depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES config FREETZ_MODULE_ip_conntrack bool "ip_conntrack.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX default n help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. This is required to do Masquerading or other kinds of Network Address Translation (except for Fast NAT). It can also be used to enhance packet filtering (see `Connection state match support' below). config FREETZ_MODULE_nf_conntrack bool "nf_conntrack.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN default n help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. This is required to do Masquerading or other kinds of Network Address Translation (except for Fast NAT). It can also be used to enhance packet filtering (see `Connection state match support' below). config FREETZ_MODULE_ip_conntrack_ftp bool "ip_conntrack_ftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_conntrack default n help Tracking FTP connections is problematic: special helpers are required for tracking them, and doing masquerading and other forms of Network Address Translation on them. config FREETZ_MODULE_nf_conntrack_ftp bool "nf_conntrack_ftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_conntrack default n help Tracking FTP connections is problematic: special helpers are required for tracking them, and doing masquerading and other forms of Network Address Translation on them. config FREETZ_MODULE_ip_conntrack_h323 bool "ip_conntrack_h323.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack default n help H.323 is a VoIP signalling protocol from ITU-T. As one of the most important VoIP protocols, it is widely used by voice hardware and software including voice gateways, IP phones, Netmeeting, OpenPhone, Gnomemeeting, etc. With this module you can support H.323 on a connection tracking/NAT firewall. This module supports RAS, Fast Start, H.245 Tunnelling, Call Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, whiteboard, file transfer, etc. For more information, please visit http://nath323.sourceforge.net/. config FREETZ_MODULE_nf_conntrack_h323 bool "nf_conntrack_h323.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_conntrack default n help H.323 is a VoIP signalling protocol from ITU-T. As one of the most important VoIP protocols, it is widely used by voice hardware and software including voice gateways, IP phones, Netmeeting, OpenPhone, Gnomemeeting, etc. With this module you can support H.323 on a connection tracking/NAT firewall. This module supports RAS, Fast Start, H.245 Tunnelling, Call Forwarding, RTP/RTCP and T.120 based audio, video, fax, chat, whiteboard, file transfer, etc. For more information, please visit http://nath323.sourceforge.net/. config FREETZ_MODULE_ip_conntrack_irc bool "ip_conntrack_irc.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_conntrack default n help There is a commonly-used extension to IRC called Direct Client-to-Client Protocol (DCC). This enables users to send files to each other, and also chat to each other without the need of a server. DCC Sending is used anywhere you send files over IRC, and DCC Chat is most commonly used by Eggdrop bots. If you are using NAT, this extension will enable you to send files and initiate chats. Note that you do NOT need this extension to get files or have others initiate chats, or everything else in IRC. config FREETZ_MODULE_nf_conntrack_irc bool "nf_conntrack_irc.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_conntrack default n help There is a commonly-used extension to IRC called Direct Client-to-Client Protocol (DCC). This enables users to send files to each other, and also chat to each other without the need of a server. DCC Sending is used anywhere you send files over IRC, and DCC Chat is most commonly used by Eggdrop bots. If you are using NAT, this extension will enable you to send files and initiate chats. Note that you do NOT need this extension to get files or have others initiate chats, or everything else in IRC. config FREETZ_MODULE_nf_conntrack_ipv4 bool "nf_conntrack_ipv4.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN default n config FREETZ_MODULE_ip_conntrack_pptp bool "ip_conntrack_pptp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack default n help This module adds support for PPTP (Point to Point Tunnelling Protocol, RFC2637) connection tracking and NAT. If you are running PPTP sessions over a stateful firewall or NAT box, you may want to enable this feature. Please note that not all PPTP modes of operation are supported yet. For more info, read top of the file net/ipv4/netfilter/ip_conntrack_pptp.c config FREETZ_MODULE_nf_conntrack_pptp bool "nf_conntrack_pptp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_conntrack select FREETZ_MODULE_nf_conntrack_proto_gre default n help This module adds support for PPTP (Point to Point Tunnelling Protocol, RFC2637) connection tracking and NAT. If you are running PPTP sessions over a stateful firewall or NAT box, you may want to enable this feature. config FREETZ_MODULE_nf_conntrack_proto_gre bool "nf_conntrack_proto_gre.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN default n help config FREETZ_MODULE_ip_conntrack_rtsp bool "ip_conntrack_rtsp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_conntrack default n help Tracking RTSP Connections config FREETZ_MODULE_ip_conntrack_tftp bool "ip_conntrack_tftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_conntrack default n help TFTP connection tracking helper, this is required depending on how restrictive your ruleset is. If you are using a tftp client behind -j SNAT or -j MASQUERADING you will need this. config FREETZ_MODULE_nf_conntrack_tftp bool "nf_conntrack_tftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28 || FREETZ_KERNEL_VERSION_2_6_32 select FREETZ_MODULE_nf_conntrack default n help TFTP connection tracking helper, this is required depending on how restrictive your ruleset is. If you are using a tftp client behind -j SNAT or -j MASQUERADING you will need this. config FREETZ_MODULE_ip_conntrack_proto_sctp bool "ip_conntrack_proto_sctp.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack default n help With this option enabled, the connection tracking code will be able to do state tracking on SCTP connections. config FREETZ_MODULE_nf_defrag_ipv4 bool "nf_defrag_ipv4.ko" depends on FREETZ_KERNEL_VERSION_2_6_28 || FREETZ_KERNEL_VERSION_2_6_32 default n config FREETZ_MODULE_ip_nat bool "ip_nat.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 && FREETZ_REPLACE_KERNEL select FREETZ_MODULE_ip_conntrack default n help The Full NAT option allows masquerading, port forwarding and other forms of full Network Address Port Translation. It is controlled by the `nat' table in iptables: see the man page for iptables(8). config FREETZ_MODULE_nf_nat bool #bool "nf_nat.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_conntrack select FREETZ_MODULE_nf_conntrack_ipv4 select FREETZ_MODULE_nf_defrag_ipv4 default n help The Full NAT option allows masquerading, port forwarding and other forms of full Network Address Port Translation. It is controlled by the `nat' table in iptables: see the man page for iptables(8). config FREETZ_MODULE_ip_nat_ftp bool "ip_nat_ftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack_ftp default n config FREETZ_MODULE_nf_nat_ftp bool "nf_nat_ftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_nat select FREETZ_MODULE_nf_conntrack_ftp default n config FREETZ_MODULE_ip_nat_h323 bool "ip_nat_h323.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 && FREETZ_REPLACE_KERNEL select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack_h323 default n config FREETZ_MODULE_nf_nat_h323 bool #bool "nf_nat_h323.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_nat select FREETZ_MODULE_nf_conntrack_h323 default n config FREETZ_MODULE_ip_nat_irc bool "ip_nat_irc.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack_irc if FREETZ_KERNEL_VERSION_2_6_19 default n config FREETZ_MODULE_nf_nat_irc bool #bool "nf_nat_irc.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_nat select FREETZ_MODULE_nf_conntrack_irc default n config FREETZ_MODULE_ip_nat_pptp bool "ip_nat_pptp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 && FREETZ_REPLACE_KERNEL select FREETZ_MODULE_ip_nat select FREETZ_MODULE_ip_conntrack_pptp default n config FREETZ_MODULE_nf_nat_pptp bool #bool "nf_nat_pptp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_nat select FREETZ_MODULE_nf_conntrack_pptp default n config FREETZ_MODULE_ip_nat_rtsp bool "ip_nat_rtsp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack_rtsp default n config FREETZ_MODULE_ip_nat_tftp bool "ip_nat_tftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_conntrack_tftp if FREETZ_KERNEL_VERSION_2_6_19 default n config FREETZ_MODULE_nf_nat_tftp bool "nf_nat_tftp.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN select FREETZ_MODULE_nf_nat select FREETZ_MODULE_nf_conntrack_tftp default n config FREETZ_MODULE_iptable_filter bool "iptable_filter.ko" select FREETZ_MODULE_ip_tables default n help Packet filtering defines a table `filter', which has a series of rules for simple packet filtering at local input, forwarding and local output. See the man page for iptables(8). config FREETZ_MODULE_iptable_mangle bool "iptable_mangle.ko" select FREETZ_MODULE_ip_tables default n help This option adds a `mangle' table to iptables: see the man page for iptables(8). This table is used for various packet alterations which can effect how the packet is routed. comment "iptable_nat.ko (not available, needs replace kernel)" depends on FREETZ_KERNEL_VERSION_2_6_19 && !FREETZ_REPLACE_KERNEL config FREETZ_MODULE_iptable_nat bool "iptable_nat.ko" depends on !FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL select FREETZ_MODULE_ip_conntrack if FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_nf_nat if FREETZ_KERNEL_VERSION_2_6_28 default n help Cannot be loaded when using AVM-kernel 2.6.19, see http://freetz.org/ticket/1929 config FREETZ_MODULE_iptable_raw bool "iptable_raw.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MIN select FREETZ_MODULE_ip_tables default n config FREETZ_MODULE_ip_tables bool "ip_tables.ko" select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN default n help iptables is a general, extensible packet identification framework. The packet filtering and full NAT (masquerading, port forwarding, etc) subsystems now use this. config FREETZ_MODULE_ipt_connmark bool "ipt_connmark.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack select FREETZ_MODULE_ip_tables default n help This option enables support for connection marks, used by the `CONNMARK' target and `connmark' match. Similar to the mark value of packets, but this mark value is kept in the conntrack session instead of the individual packets. config FREETZ_MODULE_ipt_CONNMARK bool "ipt_CONNMARK.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack select FREETZ_MODULE_ip_tables default n help This option adds a `CONNMARK' target, which allows one to manipulate the connection mark value. Similar to the MARK target, but affects the connection mark value rather than the packet mark value. config FREETZ_MODULE_ipt_conntrack bool "ipt_conntrack.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack select FREETZ_MODULE_ip_tables default n config FREETZ_MODULE_ipt_helper bool "ipt_helper.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack select FREETZ_MODULE_ip_tables default n help Helper matching allows you to match packets in dynamic connections tracked by a conntrack-helper, ie. ip_conntrack_ftp config FREETZ_MODULE_ipt_iprange bool "ipt_iprange.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help This option makes possible to match IP addresses against IP address ranges. config FREETZ_MODULE_ipt_layer7 bool "ipt_layer7.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help Say Y if you want to be able to classify connections (and their packets) based on regular expression matching of their application layer data. This is one way to classify applications such as peer-to-peer filesharing systems that do not always use the same port. config FREETZ_MODULE_ipt_ipp2p bool "ipt_ipp2p.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help This option makes possible to match some P2P packets therefore helps controlling such traffic. config FREETZ_MODULE_ipt_length bool "ipt_length.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help This option allows you to match the length of a packet against a specific value or range of values. config FREETZ_MODULE_ipt_limit bool "ipt_limit.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help limit matching allows you to control the rate at which a rule can be matched: mainly useful in combination with the LOG target ("LOG target support", below) and to avoid some Denial of Service attacks. config FREETZ_MODULE_ipt_LOG bool "ipt_LOG.ko" select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_28_MIN default n help This option adds a `LOG' target, which allows you to create rules in any iptables table which records the packet header to the syslog. config FREETZ_MODULE_ipt_comment bool "ipt_comment.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables default n help This option adds a module, which allows you to add comments to your rules. config FREETZ_MODULE_ipt_mac bool "ipt_mac.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help MAC matching allows you to match packets based on the source Ethernet address of the packet. config FREETZ_MODULE_ipt_mark bool "ipt_mark.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help Netfilter mark matching allows you to match packets based on the `nfmark' value in the packet. This can be set by the MARK target (see below). config FREETZ_MODULE_ipt_MARK bool "ipt_MARK.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help This option adds a `MARK' target, which allows you to create rules in the `mangle' table which alter the netfilter mark (nfmark) field associated with the packet prior to routing. This can change the routing method (see `Use netfilter MARK value as routing key') and can also be used by other subsystems to change their behavior. config FREETZ_MODULE_ipt_MASQUERADE bool "ipt_MASQUERADE.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help Masquerading is a special case of NAT: all outgoing connections are changed to seem to come from a particular interface's address, and if the interface goes down, those connections are lost. This is only useful for dialup accounts with dynamic IP address (ie. your IP address will be different on next dialup). config FREETZ_MODULE_ipt_multiport bool "ipt_multiport.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help Multiport matching allows you to match TCP or UDP packets based on a series of source or destination ports: normally a rule can only match a single range of ports. config FREETZ_MODULE_ipt_owner bool "ipt_owner.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help Packet owner matching allows you to match locally-generated packets based on who created them: the user, group, process or session. config FREETZ_MODULE_ipt_REDIRECT bool "ipt_REDIRECT.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MAX && \ (!FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_REPLACE_KERNEL) select FREETZ_MODULE_iptable_nat select FREETZ_MODULE_ip_nat if FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 || FREETZ_KERNEL_VERSION_2_6_28 default n help REDIRECT is a special case of NAT: all incoming connections are mapped onto the incoming interface's address, causing the packets to come to the local machine instead of passing through. This is useful for transparent proxies. config FREETZ_MODULE_ipt_REJECT bool "ipt_REJECT.ko" select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN default n help The REJECT target allows a filtering rule to specify that an ICMP error should be issued in response to an incoming packet, rather than silently being dropped. config FREETZ_MODULE_ipt_state bool "ipt_state.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_conntrack select FREETZ_MODULE_ip_tables default n help Connection state matching allows you to match packets based on their relationship to a tracked connection (ie. previous packets). This is a powerful tool for packet classification. config FREETZ_MODULE_ipt_tcpmss bool "ipt_tcpmss.ko" depends on FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_ip_tables default n help This option adds a `tcpmss' match, which allows you to examine the MSS value of TCP SYN packets, which control the maximum packet size for that connection. config FREETZ_MODULE_ipt_TCPMSS bool "ipt_TCPMSS.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help This option adds a `TCPMSS' target, which allows you to alter the MSS value of TCP SYN packets, to control the maximum size for that connection (usually limiting it to your outgoing interface's MTU minus 40). This is used to overcome criminally braindead ISPs or servers which block ICMP Fragmentation Needed packets. The symptoms of this problem are that everything works fine from your Linux firewall/router, but machines behind it can never exchange large packets: 1) Web browsers connect, then hang with no data received. 2) Small mail works fine, but large emails hang. 3) ssh works fine, but scp hangs after initial handshaking. Workaround: activate this option and add a rule to your firewall configuration like: iptables -A FORWARD -p tcp --tcp-flags SYN,RST SYN \ -j TCPMSS --clamp-mss-to-pmtu config FREETZ_MODULE_ipt_tos bool "ipt_tos.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help TOS matching allows you to match packets based on the Type Of Service fields of the IP packet. config FREETZ_MODULE_ipt_TOS bool "ipt_TOS.ko" depends on FREETZ_KERNEL_VERSION_2_6_19_MAX select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19 default n help This option adds a `TOS' target, which allows you to create rules in the `mangle' table which alter the Type Of Service field of an IP packet prior to routing. config FREETZ_MODULE_ipt_ttl bool "ipt_ttl.ko" select FREETZ_MODULE_ip_tables if FREETZ_KERNEL_VERSION_2_6_13 select FREETZ_MODULE_x_tables if FREETZ_KERNEL_VERSION_2_6_19_MIN default n help This adds CONFIG_IP_NF_MATCH_TTL option, which enabled the user to match packets by their TTL value. config FREETZ_MODULE_ipt_TTL bool "ipt_TTL.ko" default n help This option adds a `TTL' target, which allows you to create rules in the `mangle' table which alter the TTL (time to live) field of an IP packet. endmenu menu "x_tables (both IPv4 and IPv6)" depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES depends on FREETZ_KERNEL_VERSION_2_6_19_MIN config FREETZ_MODULE_x_tables bool "x_tables.ko" default n config FREETZ_MODULE_xt_helper bool "xt_helper.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables select FREETZ_MODULE_ip_conntrack default n help Helper matching allows you to match packets in dynamic connections tracked by a conntrack-helper, ie. ip_conntrack_ftp config FREETZ_MODULE_xt_CLASSIFY bool "xt_CLASSIFY.ko" select FREETZ_MODULE_x_tables default n help This option adds a `CLASSIFY' target, which enables the user to set the priority of a packet. Some qdiscs can use this value for classification, among these are: atm, cbq, dsmark, pfifo_fast, htb, prio config FREETZ_MODULE_xt_comment bool "xt_comment.ko" select FREETZ_MODULE_x_tables default n help This option adds a `comment' dummy-match, which allows you to put comments in your iptables ruleset. config FREETZ_MODULE_xt_conntrack bool "xt_conntrack.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables select FREETZ_MODULE_ip_conntrack default n help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. Layer 3 independent connection tracking is experimental scheme which generalize ip_conntrack to support other layer 3 protocols. config FREETZ_MODULE_xt_esp bool "xt_esp.ko" select FREETZ_MODULE_x_tables default n help This match extension allows you to match a range of SPIs inside ESP header of IPSec packets. config FREETZ_MODULE_xt_length bool "xt_length.ko" select FREETZ_MODULE_x_tables default n help This option allows you to match the length of a packet against a specific value or range of values. config FREETZ_MODULE_xt_limit bool "xt_limit.ko" select FREETZ_MODULE_x_tables default n help limit matching allows you to control the rate at which a rule can be matched: mainly useful in combination with the LOG target ("LOG target support", below) and to avoid some Denial of Service attacks. config FREETZ_MODULE_xt_mac bool "xt_mac.ko" select FREETZ_MODULE_x_tables default n help MAC matching allows you to match packets based on the source Ethernet address of the packet. config FREETZ_MODULE_xt_multiport bool "xt_multiport.ko" select FREETZ_MODULE_x_tables default n help Multiport matching allows you to match TCP or UDP packets based on a series of source or destination ports: normally a rule can only match a single range of ports. config FREETZ_MODULE_xt_mark bool "xt_mark.ko" select FREETZ_MODULE_x_tables default n help Netfilter mark matching allows you to match packets based on the `nfmark' value in the packet. This can be set by the MARK target (see below). config FREETZ_MODULE_xt_MARK bool "xt_MARK.ko" select FREETZ_MODULE_x_tables default n help This option adds a `MARK' target, which allows you to create rules in the `mangle' table which alter the netfilter mark (nfmark) field associated with the packet prior to routing. This can change the routing method (see `Use netfilter MARK value as routing key') and can also be used by other subsystems to change their behavior. config FREETZ_MODULE_xt_NFQUEUE bool "xt_NFQUEUE.ko" select FREETZ_MODULE_x_tables default n help This target replaced the old obsolete QUEUE target. As opposed to QUEUE, it supports 65535 different queues, not just one. config FREETZ_MODULE_xt_NOTRACK bool "xt_NOTRACK.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables select FREETZ_MODULE_ip_conntrack default n help The NOTRACK target allows a select rule to specify which packets *not* to enter the conntrack/NAT subsystem with all the consequences (no ICMP error tracking, no protocol helpers for the selected packets). config FREETZ_MODULE_xt_iprange bool "xt_iprange.ko" select FREETZ_MODULE_x_tables default n help This option adds a "iprange" match, which allows you to match based on an IP address range. (Normal iptables only matches on single addresses x with an optional mask.) config FREETZ_MODULE_xt_pkttype bool "xt_pkttype.ko" select FREETZ_MODULE_x_tables default n help Packet type matching allows you to match a packet by its "class", eg. BROADCAST, MULTICAST, ... Typical usage: iptables -A INPUT -m pkttype --pkt-type broadcast -j LOG config FREETZ_MODULE_xt_physdev bool "xt_physdev.ko" select FREETZ_MODULE_x_tables default n help Physdev packet matching matches against the physical bridge ports the IP packet arrived on or will leave by. config FREETZ_MODULE_xt_quota bool "xt_quota.ko" select FREETZ_MODULE_x_tables default n help This option adds a `quota' match, which allows to match on a byte counter. config FREETZ_MODULE_xt_realm bool "xt_realm.ko" select FREETZ_MODULE_x_tables default n help This option adds a `realm' match, which allows you to use the realm key from the routing subsystem inside iptables. This match pretty much resembles the CONFIG_NET_CLS_ROUTE4 option in tc world. config FREETZ_MODULE_xt_state bool "xt_state.ko" depends on FREETZ_KERNEL_VERSION_2_6_19 select FREETZ_MODULE_x_tables select FREETZ_MODULE_ip_conntrack default n help Connection state matching allows you to match packets based on their relationship to a tracked connection (ie. previous packets). This is a powerful tool for packet classification. config FREETZ_MODULE_xt_statistic bool "xt_statistic.ko" select FREETZ_MODULE_x_tables default n help This option adds a `statistic' match, which allows you to match on packets periodically or randomly with a given percentage. config FREETZ_MODULE_xt_string bool "xt_string.ko" select FREETZ_MODULE_x_tables default n help This option adds a `string' match, which allows you to look for pattern matchings in packets. config FREETZ_MODULE_xt_tcpudp bool "xt_tcpudp.ko" select FREETZ_MODULE_x_tables default n config FREETZ_MODULE_xt_tcpmss bool "xt_tcpmss.ko" select FREETZ_MODULE_x_tables default n help This option adds a `tcpmss' match, which allows you to examine the MSS value of TCP SYN packets, which control the maximum packet size for that connection. config FREETZ_MODULE_xt_time bool "xt_time.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN default n endmenu menu "Select kernel modules (IPv6)" depends on FREETZ_PACKAGE_IPTABLES_KERNEL_MODULES depends on FREETZ_TARGET_IPV6_SUPPORT config FREETZ_MODULE_ip6_queue bool "ip6_queue.ko" default n help Userspace queueing via NETLINK This option adds a queue handler to the kernel for IPv6 packets which lets us to receive the filtered packets with QUEUE target using libiptc as we can do with the IPv4 now. (C) Fernando Anton 2001 IPv64 Project - Work based in IPv64 draft by Arturo Azcorra. Universidad Carlos III de Madrid Universidad Politecnica de Alcala de Henares email: . config FREETZ_MODULE_ip6_tables select FREETZ_PACKAGE_IPTABLES_SHARED_LIBS select FREETZ_LIB_libxt_standard bool "ip6_tables.ko" default n help IP6 tables support (required for filtering/masq/NAT) ip6tables is a general, extensible packet identification framework. Currently only the packet filtering and packet mangling subsystem for IPv6 use this, but connection tracking is going to follow. config FREETZ_MODULE_ip6table_filter depends on FREETZ_MODULE_ip6_tables bool "ip6table_filter.ko" default n help Packet filtering Packet filtering defines a table `filter', which has a series of rules for simple packet filtering at local input, forwarding and local output. See the man page for iptables(8). config FREETZ_MODULE_ip6table_raw depends on FREETZ_MODULE_ip6_tables bool "ip6table_raw.ko" default n help raw table support (required for TRACE) This option adds a `raw' table to ip6tables. This table is the very first in the netfilter framework and hooks in at the PREROUTING and OUTPUT chains. config FREETZ_MODULE_ip6t_ah depends on FREETZ_MODULE_ip6_tables bool "ip6t_ah.ko" default n help AH match support This module allows one to match AH and ESP packets. config FREETZ_MODULE_ip6t_dst depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_dst.ko" default n help Dst opts header match support This allows one to match packets based on the hop-by-hop and destination options headers of a packet. config FREETZ_MODULE_ip6t_esp depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_esp.ko" default n help ESP match support This module allows one to match AH and ESP packets. config FREETZ_MODULE_ip6t_eui64 depends on FREETZ_MODULE_ip6_tables bool "ip6t_eui64.ko" default n help EUI64 address check This module performs checking on the IPv6 source address Compares the last 64 bits with the EUI64 (delivered from the MAC address) address config FREETZ_MODULE_ip6t_frag depends on FREETZ_MODULE_ip6_tables bool "ip6t_frag.ko" default n help Fragmentation header match support frag matching allows you to match packets based on the fragmentation header of the packet. config FREETZ_MODULE_ip6t_hbh depends on FREETZ_MODULE_ip6_tables bool "ip6t_hbh.ko" default n help Hop-by-hop and header match support This allows one to match packets based on the hop-by-hop and destination options headers of a packet. config FREETZ_MODULE_ip6t_hl depends on FREETZ_MODULE_ip6_tables bool "ip6t_hl.ko" default n help HL match support HL matching allows you to match packets based on the hop limit of the packet. config FREETZ_MODULE_ip6t_ipv6header depends on FREETZ_MODULE_ip6_tables bool "ip6t_ipv6header.ko" default n help IPv6 Extension Headers Match This module allows one to match packets based upon the ipv6 extension headers. config FREETZ_MODULE_ip6t_length depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_length.ko" default n help Packet Length match support This option allows you to match the length of a packet against a specific value or range of values. config FREETZ_MODULE_ip6t_limit depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_limit.ko" default n help limit match support limit matching allows you to control the rate at which a rule can be matched: mainly useful in combination with the LOG target ("LOG target support", below) and to avoid some Denial of Service attacks. config FREETZ_MODULE_ip6t_LOG depends on FREETZ_MODULE_ip6_tables bool "ip6t_LOG.ko" default n help LOG target support This option adds a `LOG' target, which allows you to create rules in any iptables table which records the packet header to the syslog. config FREETZ_MODULE_ip6t_mac depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_mac.ko" default n help MAC address match support mac matching allows you to match packets based on the source Ethernet address of the packet. config FREETZ_MODULE_ip6t_mark depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_mark.ko" default n help netfilter MARK match support Netfilter mark matching allows you to match packets based on the `nfmark' value in the packet. This can be set by the MARK target (see below). config FREETZ_MODULE_ip6t_multiport depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_multiport.ko" default n help Multiple port match support Multiport matching allows you to match TCP or UDP packets based on a series of source or destination ports: normally a rule can only match a single range of ports. config FREETZ_MODULE_ip6t_owner depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_owner.ko" default n help Owner match support Packet owner matching allows you to match locally-generated packets based on who created them: the user, group, process or session. config FREETZ_MODULE_ip6t_REJECT depends on FREETZ_MODULE_ip6_tables bool "ip6t_REJECT.ko" default n help The REJECT target allows a filtering rule to specify that an ICMPv6 error should be issued in response to an incoming packet, rather than silently being dropped. config FREETZ_MODULE_ip6t_rt depends on FREETZ_MODULE_ip6_tables bool "ip6t_rt.ko" default n help Routing header match support rt matching allows you to match packets based on the routing header of the packet. config FREETZ_MODULE_ip6table_mangle depends on FREETZ_MODULE_ip6_tables bool "ip6table_mangle.ko" default n help Packet mangling This option adds a `mangle' table to iptables: see the man page for iptables(8). This table is used for various packet alterations which can effect how the packet is routed. config FREETZ_MODULE_ip6t_MARK depends on FREETZ_KERNEL_VERSION_2_6_13 && FREETZ_MODULE_ip6_tables bool "ip6t_MARK.ko" default n help MARK target support This option adds a `MARK' target, which allows you to create rules in the `mangle' table which alter the netfilter mark (nfmark) field associated with the packet packet prior to routing. This can change the routing method (see `Use netfilter MARK value as routing key') and can also be used by other subsystems to change their behavior. config FREETZ_MODULE_nf_conntrack_ipv6 bool #bool "nf_conntrack_ipv6.ko" depends on FREETZ_KERNEL_VERSION_2_6_28_MIN default n help Connection tracking keeps a record of what packets have passed through your machine, in order to figure out how they are related into connections. This is IPv6 support on Layer 3 independent connection tracking. Layer 3 independent connection tracking is experimental scheme which generalize ip_conntrack to support other layer 3 protocols. endmenu config FREETZ_PACKAGE_IPTABLES_SHARED_LIBS bool "Iptables shared libraries" depends on FREETZ_PACKAGE_IPTABLES && ! FREETZ_PACKAGE_IPTABLES_STATIC default n help Shared Libraries for iptables Please note that some kernel modules have corresponding shared libraries and vice versa, so please make sure to select both of them, if they are needed for your purpose. menu "Select shared libraries (IPv4)" depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS config FREETZ_LIB_libipt_addrtype bool "libipt_addrtype.so" default n help This module matches packets based on their address type. Address types are used within the kernel networking stack and categorize addresses into various groups. The exact definition of that group depends on the specific layer three protocol. Examples: UNICAST, BROADCAST, LOCAL, MULTICAST, ANYCAST, ... config FREETZ_LIB_libipt_ah bool "libipt_ah.so" default n help This module matches the SPIs in Authentication header of IPsec packets. config FREETZ_LIB_libipt_CLUSTERIP bool "lipipt_CLUSTERIP.so" default n help This module allows you to configure a simple cluster of nodes that share a certain IP and MAC address without an explicit load balancer in front of them. Connections are statically distributed between the nodes in this cluster. config FREETZ_LIB_libipt_DNAT bool "libipt_DNAT.so" default n help This target is only valid in the nat table, in the PREROUTING and OUTPUT chains, and user-defined chains which are only called from those chains. It specifies that the destination address of the packet should be modified (and all future packets in this connection will also be mangled), and rules should cease being examined. config FREETZ_LIB_libipt_ecn bool "libipt_ecn.so" default n help This allows you to match the ECN bits of the IPv4 and TCP header. ECN is the Explicit Congestion Notification mechanism as specified in RFC3168. config FREETZ_LIB_libipt_ECN bool "libipt_ECN.so" default n help This target allows to selectively work around known ECN blackholes. It can only be used in the mangle table. config FREETZ_LIB_libipt_icmp bool "libipt_icmp.so" default n help This extension can be used if `--protocol icmp' is specified. config FREETZ_LIB_libipt_ipp2p bool "libipt_ipp2p.so" depends on FREETZ_MODULE_ipt_ipp2p default n help This extension can be used to match p2p protocols such as eDonkey, KaZaA, Gnutella, BitTorrent. config FREETZ_LIB_libipt_LOG bool "libipt_LOG.so" default n help Turn on kernel logging of matching packets. When this option is set for a rule, the Linux kernel will print some information on all matching packets (like most IP header fields) via the kernel log (where it can be read with dmesg or syslogd (8)). config FREETZ_LIB_libipt_MASQUERADE bool "libipt_MASQUERADE.so" default n help This target is only valid in the nat table, in the POSTROUTING chain. It should only be used with dynamically assigned IP (dialup) connections: if you have a static IP address, you should use the SNAT target. config FREETZ_LIB_libipt_MIRROR bool "libipt_MIRROR.so" default n help This is an experimental demonstration target which inverts the source and destination fields in the IP header and retransmits the packet. config FREETZ_LIB_libipt_NETMAP bool "libipt_NETMAP.so" default n help This target allows you to statically map a whole network of addresses onto another network of addresses. config FREETZ_LIB_libipt_realm bool "libipt_realm.so" select FREETZ_MODULE_xt_realm if FREETZ_KERNEL_VERSION_2_6_19 default n help This matches the routing realm. Routing realms are used in complex routing setups involving dynamic routing protocols like BGP. config FREETZ_LIB_libipt_REDIRECT bool "libipt_REDIRECT.so" default n help This target redirects the packet to the machine itself by changing the destination IP to the primary address of the incoming interface (locally-generated packets are mapped to the 127.0.0.1 address). config FREETZ_LIB_libipt_REJECT bool "libipt_REJECT.so" default n help This is used to send back an error packet in response to the matched packet: otherwise it is equivalent to DROP so it is a terminating TARGET, ending rule traversal. config FREETZ_LIB_libipt_SAME bool "libipt_SAME.so" default n help Similar to SNAT/DNAT depending on chain: it takes a range of addresses (`--to 1.2.3.4-1.2.3.7') and gives a client the same source-/destination-address for each connection. config FREETZ_LIB_libipt_SNAT bool "libipt_SNAT.so" default n help This target specifies that the source address of the packet should be modified (and all future packets in this connection will also be mangled), and rules should cease being examined. config FREETZ_LIB_libipt_ttl bool "libipt_ttl.so" default n help This module matches the time to live field in the IP header. config FREETZ_LIB_libipt_TTL bool "libipt_TTL.so" default n help This is used to modify the IPv4 TTL header field. The TTL field determines how many hops (routers) a packet can traverse until it's time to live is exceeded. config FREETZ_LIB_libipt_ULOG bool "libipt_ULOG.so" default n help This target provides userspace logging of matching packets. When this target is set for a rule, the Linux kernel will multicast this packet through a netlink socket. One or more userspace processes may then subscribe to various multicast groups and receive the packets. config FREETZ_LIB_libipt_unclean bool "libipt_unclean.so" default n help This module takes no options, but attempts to match packets which seem malformed or unusual. This is regarded as experimental. endmenu menu "Select shared libraries (both IPv4 and IPv6)" depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS config FREETZ_LIB_libxt_CLASSIFY bool "libxt_CLASSIFY.so" default n help This module allows you to set the skb->priority value (and thus classify the packet into a specific CBQ class). config FREETZ_LIB_libxt_comment bool "libxt_comment.so" select FREETZ_MODULE_xt_comment if FREETZ_KERNEL_VERSION_2_6_19 default n help Allows you to add comments (up to 256 characters) to any rule. config FREETZ_LIB_libxt_connbytes bool "libxt_connbytes.so" default n help Match by how many bytes or packets a connection (or one of the two flows constituting the connection) has transferred so far, or by average bytes per packet. #config FREETZ_LIB_libxt_connlimit # bool "libxt_connlimit.so" # default n # help # Allows you to restrict the number of parallel connections to a server # per client IP address (or client address block). config FREETZ_LIB_libxt_connmark bool "libxt_connmark.so" default n help This module matches the netfilter mark field associated with a connection (which can be set using the CONNMARK target below). config FREETZ_LIB_libxt_CONNMARK bool "libxt_CONNMARK.so" default n help This module sets the netfilter mark value associated with a connection. config FREETZ_LIB_libxt_CONNSECMARK bool "libxt_CONNSECMARK.so" default n help This module copies security markings from packets to connections (if unlabeled), and from connections back to packets (also only if unlabeled). Typically used in conjunction with SECMARK, it is only valid in the mangle table. config FREETZ_LIB_libxt_conntrack bool "libxt_conntrack.so" select FREETZ_MODULE_xt_conntrack if FREETZ_KERNEL_VERSION_2_6_19 default n help This module, when combined with connection tracking, allows access to the connection tracking state for this packet/connection. config FREETZ_LIB_libxt_dscp bool "libxt_dscp.so" default n help This module matches the 6 bit DSCP field within the TOS field in the IP header. DSCP has superseded TOS within the IETF. config FREETZ_LIB_libxt_DSCP bool "libxt_DSCP.so" default n help This target allows to alter the value of the DSCP bits within the TOS header of the IPv4 packet. As this manipulates a packet, it can only be used in the mangle table. config FREETZ_LIB_libxt_esp bool "libxt_esp.so" default n help This module matches the SPIs in ESP header of IPsec packets. config FREETZ_LIB_libxt_hashlimit bool "libxt_hashlimit.so" default n help hashlimit uses hash buckets to express a rate limiting match (like the limit match) for a group of connections using a single iptables rule. config FREETZ_LIB_libxt_helper bool "libxt_helper.so" select FREETZ_MODULE_xt_helper if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches packets related to a specific conntrack-helper. config FREETZ_LIB_libxt_iprange bool "libxt_iprange.so" default n help This matches on a given arbitrary range of IP addresses. config FREETZ_LIB_libxt_length bool "libxt_length.so" select FREETZ_MODULE_xt_length if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches the length of the layer-3 payload (e.g. layer-4 packet) of a packet against a specific value or range of values. config FREETZ_LIB_libxt_limit bool "libxt_limit.so" select FREETZ_MODULE_xt_limit if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches at a limited rate using a token bucket filter. A rule using this extension will match until this limit is reached (unless the `!' flag is used). It can be used in combination with the LOG target to give limited logging, for example. config FREETZ_LIB_libxt_mac bool "libxt_mac.so" select FREETZ_MODULE_xt_mac if FREETZ_KERNEL_VERSION_2_6_19 default n help Match source MAC address. config FREETZ_LIB_libxt_mark bool "libxt_mark.so" select FREETZ_MODULE_xt_mark if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches the netfilter mark field associated with a packet (which can be set using the MARK target below). config FREETZ_LIB_libxt_MARK bool "libxt_MARK.so" select FREETZ_MODULE_xt_MARK if FREETZ_KERNEL_VERSION_2_6_19 default n help This target is used to set the Netfilter mark value associated with the packet. The target can only be used in the mangle table. It can, for example, be used in conjunction with routing based on fwmark (needs iproute2). config FREETZ_LIB_libxt_multiport bool "libxt_multiport.so" select FREETZ_MODULE_xt_multiport if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches a set of source or destination ports. Up to 15 ports can be specified. A port range (port:port) counts as two ports. config FREETZ_LIB_libxt_NFLOG bool "libxt_NFLOG.so" default n help This target provides logging of matching packets. When this target is set for a rule, the Linux kernel will pass the packet to the loaded logging backend to log the packet. config FREETZ_LIB_libxt_NFQUEUE bool "libxt_NFQUEUE.so" default n help This target is an extension of the QUEUE target. As opposed to QUEUE, it allows you to put a packet into any specific queue, identified by its 16-bit queue number. config FREETZ_LIB_libxt_NOTRACK bool "libxt_NOTRACK.so" default n help This target disables connection tracking for all packets matching that rule. config FREETZ_LIB_libxt_owner bool "libxt_owner.so" default n help This module attempts to match various characteristics of the packet creator, for locally generated packets. config FREETZ_LIB_libxt_physdev bool "libxt_physdev.so" select FREETZ_MODULE_xt_physdev if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches on the bridge port input and output devices enslaved to a bridge device. config FREETZ_LIB_libxt_pkttype bool "libxt_pkttype.so" select FREETZ_MODULE_xt_pkttype if FREETZ_KERNEL_VERSION_2_6_19 default n help This module matches the link-layer packet type. config FREETZ_LIB_libxt_quota bool "libxt_quota.so" default n help Implements network quotas by decrementing a byte counter with each packet. config FREETZ_LIB_libxt_rateest bool "libxt_rateest.so" default n config FREETZ_LIB_libxt_RATEEST bool "libxt_RATEEST.so" default n help The RATEEST target collects statistics, performs rate estimation calculation and saves the results for later evaluation using the rateest match. config FREETZ_LIB_libxt_sctp bool "libxt_sctp.so" default n config FREETZ_LIB_libxt_SECMARK bool "libxt_SECMARK.so" default n help This is used to set the security mark value associated with the packet for use by security subsystems such as SELinux. config FREETZ_LIB_libxt_standard bool "libxt_standard.so" default n config FREETZ_LIB_libxt_state bool "libxt_state.so" select FREETZ_MODULE_xt_state if FREETZ_KERNEL_VERSION_2_6_19 default n help This module, when combined with connection tracking, allows access to the connection tracking state for this packet. config FREETZ_LIB_libxt_statistic bool "libxt_statistic.so" default n help This module matches packets based on some statistic condition. config FREETZ_LIB_libxt_string bool "libxt_string.so" select FREETZ_MODULE_xt_string if FREETZ_KERNEL_VERSION_2_6_19 default n help This modules matches a given string by using some pattern matching strategy. config FREETZ_LIB_libxt_tcpmss bool "libxt_tcpmss.so" select FREETZ_MODULE_xt_tcpmss if FREETZ_KERNEL_VERSION_2_6_19 default n help This matches the TCP MSS (maximum segment size) field of the TCP header. config FREETZ_LIB_libxt_TCPMSS bool "libxt_TCPMSS.so" default n help This target allows to alter the MSS value of TCP SYN packets, to control the maximum size for that connection (usually limiting it to your outgoing interface's MTU minus 40 for IPv4 or 60 for IPv6, respectively). config FREETZ_LIB_libxt_tcp bool "libxt_tcp.so" select FREETZ_MODULE_xt_tcpudp if FREETZ_KERNEL_VERSION_2_6_19 default n help These extensions can be used if `--protocol tcp' is specified. config FREETZ_LIB_libxt_time bool "libxt_time.so" default n help This matches if the packet arrival time/date is within a given range. config FREETZ_LIB_libxt_tos bool "libxt_tos.so" default n help This module matches the 8-bit Type of Service field in the IPv4 header (i.e. including the "Precedence" bits) or the (also 8-bit) Priority field in the IPv6 header. config FREETZ_LIB_libxt_TOS bool "libxt_TOS.so" default n help This module sets the Type of Service field in the IPv4 header (including the 'precedence' bits) or the Priority field in the IPv6 header. config FREETZ_LIB_libxt_TRACE bool "libxt_TRACE.so" default n help This target marks packes so that the kernel will log every rule which match the packets as those traverse the tables, chains, rules. (The ipt_LOG or ip6t_LOG module is required for the logging.) config FREETZ_LIB_libxt_u32 bool "libxt_u32.so" default n help U32 tests whether quantities of up to 4 bytes extracted from a packet have specified values. The specification of what to extract is general enough to find data at given offsets from tcp headers or payloads. config FREETZ_LIB_libxt_udp bool "libxt_udp.so" select FREETZ_MODULE_xt_tcpudp if FREETZ_KERNEL_VERSION_2_6_19 default n help These extensions can be used if `--protocol udp' is specified. endmenu menu "Select shared libraries (IPv6)" depends on FREETZ_PACKAGE_IPTABLES_SHARED_LIBS depends on FREETZ_TARGET_IPV6_SUPPORT config FREETZ_LIB_libip6t_ah bool "libip6t_ah.so" default n help This module matches the parameters in Authentication header of IPsec packets. config FREETZ_LIB_libip6t_dst bool "libip6t_dst.so" default n help This module matches the parameters in Destination Options header. config FREETZ_LIB_libip6t_eui64 bool "libip6t_eui64.so" default n help This module matches the EUI-64 part of a stateless autoconfigured IPv6 address. config FREETZ_LIB_libip6t_frag bool "libip6t_frag.so" default n help This module matches the parameters in Fragment header. config FREETZ_LIB_libip6t_hbh bool "libip6t_hbh.so" default n help This module matches the parameters in Hop-by-Hop Options header. config FREETZ_LIB_libip6t_hl bool "libip6t_hl.so" default n help This module matches the Hop Limit field in the IPv6 header. config FREETZ_LIB_libip6t_HL bool "libip6t_HL.so" default n help This is used to modify the Hop Limit field in IPv6 header. The Hop Limit field is similar to what is known as TTL value in IPv4. config FREETZ_LIB_libip6t_icmp6 bool "libip6t_icmp6.so" default y help This extension can be used if `--protocol ipv6-icmp' or `--protocol icmpv6' is specified. config FREETZ_LIB_libip6t_ipv6header bool "libip6t_ipv6header.so" default n help This module matches IPv6 extension headers and/or upper layer header. config FREETZ_LIB_libip6t_LOG bool "libip6t_LOG.so" default n help Turn on kernel logging of matching packets. When this option is set for a rule, the Linux kernel will print some information on all matching packets (like most IPv6 IPv6-header fields) via the kernel log (where it can be read with dmesg or syslogd (8)). config FREETZ_LIB_libip6t_mh bool "libip6t_mh.so" default n help This extension is loaded if `--protocol ipv6-mh' or `--protocol mh' is specified. config FREETZ_LIB_libip6t_REJECT bool "libip6t_REJECT.so" default n help This is used to send back an error packet in response to the matched packet: otherwise it is equivalent to DROP so it is a terminating TARGET, ending rule traversal. config FREETZ_LIB_libip6t_rt bool "libip6t_rt.so" default n help Match on IPv6 routing header. endmenu endif