# Makefile for danisahne mod # # $Id$ # # Copyright (C) 1999-2004 by Erik Andersen # Copyright (C) 2005-2006 by Daniel Eiband # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA # #-------------------------------------------------------------- # Just run 'make menuconfig', configure stuff, then run 'make'. # You shouldn't need to mess with anything beyond this point... #-------------------------------------------------------------- TOPDIR=. CONFIG_CONFIG_IN=Config.in CONFIG_DEFCONFIG=.defconfig CONFIG=tools/config noconfig_targets:=menuconfig config oldconfig defconfig tools ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),) -include $(TOPDIR)/.config endif MAKE:=make IMAGE:= LOCALIP:= RECOVER:= ADDON_DIR:=addon BUILD_DIR:=build DL_DIR:=dl MAKE_DIR:=make PACKAGES_DIR:=packages ROOT_DIR:=root SOURCE_DIR:=source TOOLCHAIN_DIR:=toolchain TOOLS_DIR:=tools PACKAGES_BUILD_DIR:=$(PACKAGES_DIR)/$(BUILD_DIR) TOOLCHAIN_BUILD_DIR:=$(TOOLCHAIN_DIR)/$(BUILD_DIR) all: step world: $(DL_DIR) $(BUILD_DIR) $(PACKAGES_DIR) $(SOURCE_DIR) \ $(PACKAGES_BUILD_DIR) $(TOOLCHAIN_BUILD_DIR) include $(TOOLS_DIR)/make/Makefile.in TOOLS_CLEAN:=$(patsubst %,%-clean,$(TOOLS)) TOOLS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TOOLS)) TOOLS_DISTCLEAN:=$(patsubst %,%-distclean,$(TOOLS)) TOOLS_SOURCE:=$(patsubst %,%-source,$(TOOLS)) include $(TOOLS_DIR)/make/*.mk $(DL_DIR): @mkdir -p $(DL_DIR) $(BUILD_DIR): @mkdir -p $(BUILD_DIR) $(PACKAGES_DIR): @mkdir -p $(PACKAGES_DIR) $(SOURCE_DIR): @mkdir -p $(SOURCE_DIR) $(PACKAGES_BUILD_DIR): @mkdir -p $(PACKAGES_BUILD_DIR) $(TOOLCHAIN_BUILD_DIR): @mkdir -p $(TOOLCHAIN_BUILD_DIR) ifeq ($(strip $(DS_HAVE_DOT_CONFIG)),y) step: world tools firmware -include .config.cmd include $(MAKE_DIR)/Makefile.in include $(MAKE_DIR)/*/Makefile.in include $(TOOLCHAIN_DIR)/make/Makefile.in TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS)) TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS)) TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS)) TARGETS_PRECOMPILED:=$(patsubst %,%-precompiled,$(TARGETS)) PACKAGES_BUILD:=$(patsubst %,%-package,$(PACKAGES)) PACKAGES_CLEAN:=$(patsubst %,%-clean,$(PACKAGES)) PACKAGES_DIRCLEAN:=$(patsubst %,%-dirclean,$(PACKAGES)) PACKAGES_LIST:=$(patsubst %,%-list,$(PACKAGES)) PACKAGES_SOURCE:=$(patsubst %,%-source,$(PACKAGES)) PACKAGES_PRECOMPILED:=$(patsubst %,%-precompiled,$(PACKAGES)) LIBS_CLEAN:=$(patsubst %,%-clean,$(LIBS)) LIBS_DIRCLEAN:=$(patsubst %,%-dirclean,$(LIBS)) LIBS_SOURCE:=$(patsubst %,%-source,$(LIBS)) LIBS_PRECOMPILED:=$(patsubst %,%-precompiled,$(LIBS)) TOOLCHAIN_CLEAN:=$(patsubst %,%-clean,$(TOOLCHAIN)) TOOLCHAIN_DIRCLEAN:=$(patsubst %,%-dirclean,$(TOOLCHAIN)) TOOLCHAIN_DISTCLEAN:=$(patsubst %,%-distclean,$(TOOLCHAIN)) TOOLCHAIN_SOURCE:=$(patsubst %,%-source,$(TOOLCHAIN)) include $(MAKE_DIR)/*/*.mk include $(TOOLCHAIN_DIR)/make/*.mk IMAGE:=$(DL_DIR)/$(DL_SOURCE) DL_IMAGE:=$(IMAGE) $(DL_DIR)/$(DL_SOURCE): ifeq ($(strip $(DS_TYPE_LABOR)),y) @echo "" @echo "Please copy the following file into the 'dl' sub-directory manually:" @echo "$(DL_SOURCE)" @echo "" @exit 3 else @if ! ./fwmod_download -C $(DL_DIR) $(DL_SITE) $(DL_SOURCE); then \ latest="$$(./fwmod_list "$(DL_SITE)" | sort | tail -1)"; \ [ -z "$$latest" ] && exit 1; \ if [ "$(DL_SOURCE)" != "$$latest" ]; then \ while true; do \ echo -n "Use the latest firmware $$latest? (y/n) "; \ read yn; \ case "$$yn" in \ [yY]*) sed -e 's/# DS_DL_OVERRIDE is not set/DS_DL_OVERRIDE=y/' \ -e 's/DL_SOURCE="$(DL_SOURCE)"/DL_SOURCE="'"$$latest"'"/' \ .config > .config.tmp; \ mv .config.tmp .config; \ echo ""; \ echo "Re-run \`make' for the changes to take effect."; \ echo "WARNING: This configuration is probably untested!"; \ echo ""; \ break ;; \ [nN]*) break ;; \ esac; \ done; \ exit 3; \ fi; \ fi endif ifeq ($(strip $(DS_TYPE_SPEEDPORT_W701V)),y) IMAGE2:=$(strip $(DL_DIR)/$(DS_DL_SOURCE2)) DL_IMAGE+=$(IMAGE2) $(DL_DIR)/$(DS_DL_SOURCE2): @./fwmod_download -C $(DL_DIR) $(DS_DL_SITE2) $(DS_DL_SOURCE2) > /dev/null @echo "done." @echo "" endif ifeq ($(strip $(DS_TYPE_SPEEDPORT_W900V)),y) IMAGE2:=$(strip $(DL_DIR)/$(DS_DL_SOURCE2)) DL_IMAGE+=$(IMAGE2) $(DL_DIR)/$(DS_DL_SOURCE2): @./fwmod_download -C $(DL_DIR) $(DS_DL_SITE2) $(DS_DL_SOURCE2) > /dev/null @echo "done." @echo "" endif package-list: package-list-clean $(PACKAGES_LIST) @touch .static @( echo "# Automatically generated - DO NOT EDIT!"; cat .static ) > .static.tmp @mv .static.tmp .static @touch .dynamic @( echo "# Automatically generated - DO NOT EDIT!"; cat .dynamic ) > .dynamic.tmp @mv .dynamic.tmp .dynamic package-list-clean: @rm -f .static .dynamic ifeq ($(strip $(PACKAGES)),) firmware: tools $(DL_IMAGE) package-list exclude-lists @echo "" @echo "WARNING: There are no packages selected. To install packages type" @echo " \`make menuconfig' and change to the 'Package selection' submenu." @echo "" else firmware: tools $(DL_IMAGE) $(PACKAGES) package-list exclude-lists endif @rm -f firmware_*.image @./fwmod -d $(BUILD_DIR) $(DL_IMAGE) @mv $(BUILD_DIR)/$(DS_TYPE_STRING)*.image ./ test: $(BUILD_DIR)/.modified @echo "no tests defined" toolchain-depend: | $(TOOLCHAIN) toolchain: $(DL_DIR) $(SOURCE_DIR) $(TOOLCHAIN) @echo "" @echo "FINISHED: $(TOOLCHAIN_DIR)/kernel/ - glibc compiler for the kernel" @echo " $(TOOLCHAIN_DIR)/target/ - uClibc compiler for the userspace" @echo "" ifeq ($(strip $(DS_EXTERNAL_COMPILER)),y) sources: $(DL_DIR) $(SOURCE_DIR) $(PACKAGES_DIR) $(DL_IMAGE) \ $(TARGETS_SOURCE) $(PACKAGES_SOURCE) $(TOOLS_SOURCE) precompiled: $(DL_DIR) $(SOURCE_DIR) $(PACKAGES_DIR) libgcc-installed \ $(TARGETS_PRECOMPILED) $(PACKAGES_PRECOMPILED) else libs: $(DL_DIR) $(SOURCE_DIR) libgcc-installed $(LIBS_PRECOMPILED) sources: $(DL_DIR) $(SOURCE_DIR) $(PACKAGES_DIR) $(DL_IMAGE) \ $(TARGETS_SOURCE) $(PACKAGES_SOURCE) $(LIBS_SOURCE) $(TOOLCHAIN_SOURCE) $(TOOLS_SOURCE) precompiled: $(DL_DIR) $(SOURCE_DIR) $(PACKAGES_DIR) toolchain-depend libgcc-installed \ $(LIBS_PRECOMPILED) $(TARGETS_PRECOMPILED) $(PACKAGES_PRECOMPILED) packages-precompiled: $(PACKAGES_DIR) $(LIBS_PRECOMPILED) $(TARGETS_PRECOMPILED) $(PACKAGES_PRECOMPILED) endif clean: $(TARGETS_CLEAN) $(PACKAGES_CLEAN) $(LIBS_CLEAN) $(TOOLCHAIN_CLEAN) $(TOOLS_CLEAN) common-clean dirclean: $(TARGETS_DIRCLEAN) $(PACKAGES_DIRCLEAN) $(LIBS_DIRCLEAN) $(TOOLCHAIN_DIRCLEAN) $(TOOLS_DIRCLEAN) common-dirclean distclean: $(TARGETS_DIRCLEAN) $(PACKAGES_DIRCLEAN) $(LIBS_DIRCLEAN) $(TOOLCHAIN_DISTCLEAN) $(TOOLS_DISTCLEAN) common-distclean .PHONY: firmware package-list package-list-clean sources precompiled toolchain toolchain-depend libs \ $(TARGETS) $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_PRECOMPILED) \ $(PACKAGES) $(PACKAGES_BUILD) $(PACKAGES_CLEAN) $(PACKAGES_DIRCLEAN) $(PACKAGES_LIST) $(PACKAGES_SOURCE) $(PACKAGES_PRECOMPILED) \ $(LIBS) $(LIBS_CLEAN) $(LIBS_DIRCLEAN) $(LIBS_SOURCE) $(LIBS_PRECOMPILED) \ $(TOOLCHAIN) $(TOOLCHAIN_CLEAN) $(TOOLCHAIN_DIRCLEAN) $(TOOLCHAIN_DISTCLEAN) $(TOOLCHAIN_SOURCE) else step: menuconfig clean: $(TOOLS_CLEAN) common-clean dirclean: $(TOOLS_DIRCLEAN) common-dirclean distclean: $(TOOLS_DISTCLEAN) common-distclean endif tools: $(DL_DIR) $(SOURCE_DIR) $(TOOLS) recover: ifeq ($(strip $(TERM)),cygwin) @echo "Recovery is not supported in cygwin yet." 1>&2 else @if [ -z "$(IMAGE)" ]; then \ echo "Specify an image to recover." 1>&2; \ echo "e.g. make recover IMAGE=some.image" 1>&2; \ elif [ -z "$(RECOVER)" ]; then \ echo "Specify recover script." 1>&2; \ echo "make recover RECOVER=[adam|eva|ds]" 1>&2; \ echo " adam - most boxes like ATA, 7050" 1>&2; \ echo " eva - newer boxes like 7170" 1>&2; \ echo " ds - modified adam script from ds-mod" 1>&2; \ elif [ ! -r "$(IMAGE)" ]; then \ echo "Cannot read $(IMAGE)." 1>&2; \ else \ echo "This can help if your box is not booting any more"; \ echo "(Power LED on and flashing of all LEDs every 5 secs)."; \ echo ""; \ echo "Make sure that there is only one box in your subnet."; \ echo ""; \ while true; do \ echo "Are you sure you want to recover filesystem and kernel"; \ echo -n "from $(IMAGE)? (y/n) "; \ read yn; \ case "$$yn" in \ [yY]*) echo ""; \ if [ -z "$(LOCALIP)" ]; then \ echo "If this fails try to specify a local IP adress. Your"; \ echo "local IP has to be in the 192.168.178.0/24 subnet."; \ echo "e.g. make recover LOCALIP=192.168.178.20"; \ echo ""; \ $$(pwd)/$(TOOLS_DIR)/recover-$(RECOVER) -f "$$(pwd)/$(IMAGE)"; \ else \ $$(pwd)/$(TOOLS_DIR)/recover-$(RECOVER) -l $(LOCALIP) -f "$$(pwd)/$(IMAGE)"; \ fi; break ;; \ [nN]*) break ;; \ esac; \ done; \ fi endif $(CONFIG)/conf: $(MAKE) -C $(CONFIG) conf -@if [ ! -f .config ] ; then \ cp $(CONFIG_DEFCONFIG) .config; \ fi $(CONFIG)/mconf: $(MAKE) -C $(CONFIG) ncurses conf mconf -@if [ ! -f .config ] ; then \ cp $(CONFIG_DEFCONFIG) .config; \ fi menuconfig: $(CONFIG_CONFIG_IN) $(CONFIG)/mconf @$(CONFIG)/mconf $(CONFIG_CONFIG_IN) config: $(CONFIG_CONFIG_IN) $(CONFIG)/conf @$(CONFIG)/conf $(CONFIG_CONFIG_IN) oldconfig: $(CONFIG_CONFIG_IN) $(CONFIG)/conf @$(CONFIG)/conf -o $(CONFIG_CONFIG_IN) defconfig: $(CONFIG_CONFIG_IN) $(CONFIG)/conf @$(CONFIG)/conf -d $(CONFIG_CONFIG_IN) exclude-lists: @for i in root kernel/root; do \ ( \ cd $$i; find . -type d -name .svn -prune \ ) > "$$(dirname "$$i")"/.exclude; \ done common-clean: ./fwmod_custom clean rm -f .static .dynamic rm -f .exclude .exclude-dist kernel/.exclude rm -f firmware_*.image rm -rf $(BUILD_DIR) $(PACKAGES_DIR) -$(MAKE) -C $(CONFIG) clean common-dirclean: rm -rf $(DL_DIR) $(BUILD_DIR) $(PACKAGES_DIR) $(SOURCE_DIR) -rm -rf $(ADDON_DIR)/* -cp .defstatic $(ADDON_DIR)/static.pkg -cp .defdynamic $(ADDON_DIR)/dynamic.pkg common-distclean: common-clean rm -f .config .config.old .config.cmd .tmpconfig.h rm -rf $(PACKAGES_BUILD_DIR) $(TOOLCHAIN_BUILD_DIR) rm -rf $(DL_DIR) $(PACKAGES_DIR) $(SOURCE_DIR) -rm -rf $(ADDON_DIR)/* -cp .defstatic $(ADDON_DIR)/static.pkg -cp .defdynamic $(ADDON_DIR)/dynamic.pkg dist: distclean version="$$(cat .version)"; \ dir="$$(cat .version | sed -e 's#^\(ds-[0-9\.]*\).*$$#\1#')"; \ ( cd ../; find "$$dir" -type d -name .svn -prune; \ echo "$${dir}/.exclude-dist" ) > .exclude-dist; \ ( cd ../; tar --exclude-from="$${dir}/.exclude-dist" -cvjf "$${version}.tar.bz2" "$$dir" ) rm -f .exclude-dist .PHONY: all world step menuconfig config oldconfig defconfig exclude-lists tools recover \ clean dirclean distclean common-clean common-dirclean common-distclean dist \ $(TOOLS) $(TOOLS_CLEAN) $(TOOLS_DIRCLEAN) $(TOOLS_DISTCLEAN) $(TOOLS_SOURCE) \ $(DL_DIR) $(BUILD_DIR) $(PACKAGES_DIR) $(SOURCE_DIR) \ $(PACKAGES_BUILD_DIR) $(TOOLCHAIN_BUILD_DIR)